| Internet-Draft | H-PCE-Determination | July 2023 |
| Chen, et al. | Expires 10 January 2024 | [Page] |
This document presents extensions to the Path Computation Element Communication Protocol (PCEP) for determining parent child relations and exchanging the information between a parent and a child PCE in a hierarchical PCE system.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 10 January 2024.¶
Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
A hierarchical PCE architecture is described in RFC 6805, in which a parent PCE has a number of child PCEs. A child PCE may also be a parent PCE, which has multiple child PCEs.¶
For a parent PCE, it needs to obtain the information about each of its child PCEs. The information about a child PCE comprises the address or ID of the PCE and the domain for which the PCE is responsible. It may also include the position of the PCE, which indicates whether the PCE is a leaf (i.e., only a child) or branch (i.e., a child and also a parent). In addition, the information may indicate whether the child PCE and its responsible domain is in a same organization as the parent PCE.¶
For a child PCE, it needs to obtain the information about its parent PCE, which includes the address or ID of the parent PCE. The information may also indicate whether the parent PCE is in a same organization as the child PCE.¶
After a user configures a parent PCE and a child PCE over a session, this parent child PCE relation needs to be determined in the protocol level. This is similar to OSPF and BGP. After an adjacency between two OSPF routers is configured by a user, the OSPF protocol (refer to RFC 2328, Section 7) will determine whether the adjacency is allowed based on the parameters configured, and forms the OSPF adjacency after the determination. After a peer relation between two BGP routers is configured by a user, the BGP protocol (refer to RFC 4271, Section 8) will determine whether the peer is allowed based on the parameters configured, and forms the BGP peer relation after the determination.¶
For a parent child PCE relation determination, the PCE protocol needs to check or confirm whether the parent child PCE relation is allowed based on the parameters configured. If so, the child PCE has to send its parent PCE the information about it and vice versa.¶
This document presents extensions to the Path Computation Element Communication Protocol (PCEP) for determining parent child relations and exchanging the information between a parent and a child PCE in a hierarchical PCE system.¶
The following terminology is used in this document.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].¶
This section describes the extensions to PCEP for determining the relation between a parent PCE and a child PCE and exchanging the information between a parent and a child PCE in a hierarchical PCE system. A child PCE is simply called a child and a parent PCE is called a parent in the following sections.¶
During a PCEP session establishment between two PCEP speakers, each of them advertises its capabilities for Hierarchical PCE (H-PCE for short) through the Open Message with the Open Object containing a new TLV to indicate its capabilities for H-PCE. This new TLV is called H-PCE capability TLV. It has the following format.¶
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type = TBD1 | Length |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|P|C|S|B| Capability Flags |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Optional Sub-TLVs |
~ ~
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
¶
The type of the TLV is TBD1. It has a length of 4 octets plus the size of optional Sub-TLVs. The value of the TLV comprises a capability flags field of 32 bits, which are numbered from the most significant as bit zero. Some of them are defined as follows. The others are not defined and MUST be set to zero.¶
The following Sub-TLVs are defined:¶
When a child sends its parent a Open message, it places the information about it in the message through using some optional Sub-TLVs. When a parent sends each of its child PCEs a Open message, it puts the information about it in the message.¶
A domain is an AS or an area in an AS. An AS is identified by an AS number. An area in an AS is identified by the combination of the AS and the area. The former is indicated by an AS number and the latter by an area number. A domain is represented by a domain Sub-TLV containing an AS number and a optional area number.¶
The format of the domain Sub-TLV is shown below:¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type (tTBD1) | Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | AS Number (4 bytes) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ~ Optional Area Number ~ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ where Length is four plus size of area number.¶
An AS is represented by a domain Sub-TLV containing only the AS number of the AS. In this case, the Length is four. An area in an AS is represented by a domain Sub-TLV containing the AS number of the AS and the area number of the area. In this case, the Length is eight.¶
An Identifier (ID) of a PCE (PCE ID for short) is a 32-bit number that uniquely identifies the PCE among all PCEs. This 32-bit number for PCE ID SHOULD NOT be zero.¶
The format of the PCE ID Sub-TLV is shown below:¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type (tTBD3) | Length (4) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | PCE ID (4 bytes) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The PCE ID Sub-TLV specifies an non zero number as the identifier of the PCE.¶
Alternatively, an IP address attached to a PCE can also be used as an identifier of the PCE. The format of an IPv4 address Sub-TLV is shown below:¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type (tTBD4) | Length (4) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | IPv4 Address (4 bytes) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+¶
The IPv4 address Sub-TLV specifies an IPv4 address associated with the PCE, which is used as the identifier of the PCE.¶
The format of an IPv6 address Sub-TLV is shown below:¶
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type (tTBD5) | Length (16) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | IPv6 Address (16 bytes) | ~ ~ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+¶
The IPv6 Sub-TLV specifies an IPv6 address associated with the PCE, which is used as the identifier of the PCE.¶
For two PCEs A and B configured as parent and child, they determine parent child relation through Open messages in the initialization phase. The following is a sequence of events related.¶
A B
Configure B Configure A
as its child as its parent
Open (P=1, A's ID)
-------------------> Same as configured
A is B's parent
Open (C=1, B's ID)
Same as configured <-------------------
B is A's child
¶
A sends B a Open message with P=1 and A's ID after B is configured as its child on it. B sends A a Open message with C=1 and B's ID after A is configured as its parent on it.¶
When A receives the Open message from B and determines C=1 and the PCE ID of B in the message is the same as the PCE ID of the child locally configured, B is A's child.¶
When B receives the Open message from A and determines P=1 and the PCE ID of A in the message is the same as the PCE ID of the parent locally configured, A is B's parent.¶
The Open message from child B to its parent A contains B's domain, which is represented by a domain Sub-TLV in the H-PCE capability TLV. If child B is also a parent, the B flag in the TLV is set to 1.¶
The PCE ID in a Open message may be represented in one of the following ways:¶
When the IP address Sub-TLV is used, the address in the Sub-TLV MUST be the same as the source IP address of the PCE session.¶
For a child that is a leaf, it is normally responsible for one domain, which is contained in the message to its parent.¶
For a child that is a branch (i.e., also a parent of multiple child PCEs), it may be directly responsible for one domain, which is contained in the message to its parent. In addition, it is responsible for the domains of its child PCEs. In other words, it is responsible for computing paths crossing the domains through working together with its child PCEs. If these domains are all areas of an AS, the AS is included in the message to its parent.¶
A parent stores the information about each of its child PCEs received. When the session to one of them is down, it removes the information about the child on that session.¶
A child stores the information about its parent received. When the session to the parent is down, it removes the information about the parent.¶
If there already exists a session between A and B and the configurations on parent and child are issued on them, the procedures above may be executed through bringing down the existing session and establishing a new session between them. Alternatively, they may determine parent child relation through using extended Notification messages in the same procedures as using Open messages described above without bringing down the existing session.¶
The following new Notification-type and Notification-value are defined for H-PCE:¶
Notification-type=5 (TBD): Determination of H-PCE¶
The mechanism described in this document does not raise any new security issues for the PCEP protocols.¶
This section specifies requests for IANA allocation.¶
The authors would like to Jescia Chen, Adrian Farrel for their valuable comments on this draft.¶