| Internet-Draft | Randomized and Changing MAC Address stat | September 2023 |
| Zuniga, et al. | Expires 16 March 2024 | [Page] |
Internet privacy has become a major concern over the past few years. Users are becoming more aware that their online activity leaves a vast digital footprint, that communications are not always properly secured, and that their location and actions can be easily tracked. One of the main factors for the location tracking issue is the wide use of long-lasting identifiers, such as MAC addresses.¶
There have been several initiatives at the IETF and the IEEE 802 standards committees to overcome some of these privacy issues. This document provides an overview of these activities, with the intention to inform the technical community about them, and help coordinate between present and future standardization activities.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 16 March 2024.¶
Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
Internet privacy is becoming a huge concern, as more and more mobile devices are getting directly (e.g., via cellular or Wi-Fi) or indirectly (e.g., via a smartphone using Bluetooth) connected to the Internet. This ubiquitous connectivity, together with not very secure protocol stacks and the lack of proper education about privacy make it very easy to track/monitor the location of users and/or eavesdrop their physical and online activities. This is due to many factors, such as the vast digital footprint that users leave on the Internet, for instance sharing information on social networks, cookies used by browsers and servers to provide a better navigation experience, connectivity logs that allow tracking of a user’s Layer-2 (L2/MAC) or Layer-3 (L3) address, web trackers, etc.; and/or the weak (or even null in some cases) authentication and encryption mechanisms used to secure communications.¶
This privacy concern affects all layers of the protocol stack, from the lower layers involved in the actual access to the network (e.g., the MAC/Layer-2 and Layer-3 addresses can be used to obtain the location of a user) to higher layer protocol identifiers and user applications [wifi_internet_privacy]. In particular, IEEE 802 MAC addresses have historically been an easy target for tracking users [wifi_tracking].¶
There have been several initiatives at the IETF and the IEEE 802 standards committees to overcome some of these privacy issues. This document provides an overview of these activities, with the intention to inform the community and help coordinate between present and futures standardization activities.¶
The following terms are used in this document:¶
Most mobile devices used today are Wi-Fi enabled (i.e. they are equipped with an IEEE 802.11 wireless local area network interface). Wi-Fi interfaces, as any other kind of IEEE 802-based network interface, like Ethernet (i.e. IEEE 802.3) have a Layer-2 address also referred to as MAC address, which can be seen by anybody who can receive the signal transmitted by the network interface. The format of these addresses is shown in Figure 1.¶
+--------+--------+---------+--------+--------+---------+
| Organizationally Unique | Network Interface |
| Identifier (OUI) | Controller (NIC) Specific |
+--------+--------+---------+--------+--------+---------+
/ \
/ \
/ \ b0 (U/L bit):
/ \ 0: unicast
/ \ 1: multicast
/ \
/ \ b1:
+--+--+--+--+--+--+--+--+ 0: globally unique (OUI enforced)
|b7|b6|b5|b4|b3|b2|b1|b0| 1: locally administered
+--+--+--+--+--+--+--+--+
MAC addresses can either be universally administered or locally administered. Universally administered and locally administered addresses are distinguished by setting the second-least-significant bit of the most significant byte of the address (the U/L bit).¶
A universally administered address is uniquely assigned to a device by its manufacturer. Most physical devices are provided with a universally administered address, which is composed of two parts: (i) the Organizationally Unique Identifier (OUI), which are the first three octets in transmission order and identify the organization that issued the identifier, and (ii) Network Interface Controller (NIC) Specific, which are the following three octets, assigned by the organization that manufactured the NIC, in such a way that the resulting MAC address is globally unique.¶
Locally administered addresses override the burned-in address, and they can either be set-up by the network administrator, or by the Operating System (OS) of the device to which the address pertains. However, as explained in further sections of this document, there are new initiatives at the IEEE 802 and other organizations to specify ways in which these locally administered addresses should be assigned, depending on the use case.¶
Since universally administered MAC addresses are by definition globally-unique, when a device uses this MAC address to transmit data -especially over the air- it is relatively easy to track this device by simple medium observation. Since a device is usually directly associated to an individual, this poses a privacy concern [link_layer_privacy].¶
MAC addresses can be easily observed by a third party, such as a passive device listening to communications in the same network. In an 802.11 network, a station exposes its MAC address in two different situations:¶
One way to overcome this privacy concern is by using randomly generated MAC addresses. As described in the previous section, the IEEE 802 addressing includes one bit to specify if the hardware address is locally or globally administered. This allows generating local addresses without the need of any global coordination mechanism to ensure that the generated address is still unique within the local network. This feature can be used to generate random addresses, which decouple the globally-unique identifier from the device and therefore make it more difficult to track a user device from its MAC/L2 address [enhancing_location_privacy].¶
As an outcome to the STRINT W3C/IAB Workshop [strint], on July 2014 a Tutorial on Pervasive Surveillance of the Internet - Designing Privacy into Internet Protocols was given at the IEEE 802 Plenary meeting in San Diego [privacy_tutorial]. The Tutorial provided an update on the recent developments regarding Internet privacy, the actions that other SDOs such as IETF were taking, and guidelines that were being followed when developing new Internet protocol specifications (e.g. [RFC6973]). The Tutorial highlighted some Privacy concerns applicable specifically to Link Layer technologies and provided suggestions on how IEEE 802 could help addressing them.¶
Following the discussions and interest within the IEEE 802 community, on 18 July 2014 the IEEE 802 Executive Committee (EC) created an IEEE 802 EC Privacy Recommendation Study Group (SG) [ieee_privacy_ecsg]. The work and discussions from the group have generated multiple outcomes, such as: 802E PAR: Recommended Practice for Privacy Considerations for IEEE 802 Technologies [IEEE_802E], and the 802c PAR: Standard for Local and Metropolitan Area Networks - Overview and Architecture Amendment - Local Medium Access Control (MAC) Address Usage [IEEE_802c].¶
In order to test the effects of MAC address randomization, major trials were conducted at the IETF and IEEE 802 meetings between November 2014 and March 2015 - IETF91, IETF92 and IEEE 802 Plenary in Berlin. The purpose of the experiments was to evaluate the use of MAC address randomization from two different perspectives: (i) the effect on the connectivity experience of the end-user, also checking if applications and operating systems (OSs) were affected; and (ii) the potential impact on the network infrastructure itself. Some of the findings were published in [wifi_internet_privacy].¶
During the experiments it was observed that the probability of address duplication in a network with this characteristics is negligible. The experiments also showed that other protocol identifiers can be correlated and therefore be used to still track an individual. Hence, effective privacy tools should not work in isolation at a single layer, but they should be coordinated with other privacy features at higher layers.¶
Since then, MAC randomization has further been implemented by mobile operating systems to provide better privacy for mobile phone users when connecting to public wireless networks [privacy_ios], [privacy_windows], [privacy_android].¶
Practical experiences of Randomized And Changing MAC Addresses (RCM) in live devices helped researchers fine-tune their understanding of attacks against randomization mechanisms [when_mac_randomization_fails]. At IEEE 802.11 these research experiences eventually formed the basis for a specified mechanism introduced in the IEEE 802.11aq in 2018 which randomize MAC addresses that recommends mechanisms to avoid pitfalls [IEEE_802_11_aq].¶
More recent developments include turning on MAC randomization in mobile operating systems by default, which has an impact on the ability of network operators to personalize or customize services [rcm_user_experience_csd]. Therefore, follow-on work in the IEEE 802.11 mapped effects of potentially large uptake of randomized MAC identifiers on a number of commonly offered operator services in 2019[rcm_tig_final_report]. In the summer of 2020 this work emanated in two new standards projects with the purpose of developing mechanisms that do not decrease user privacy and enable an optimal user experience when the MAC address of a device in an Extended Service Set is randomized or changes [rcm_user_experience_par] and user privacy solutions applicable to IEEE Std 802.11 [rcm_privacy_par].¶
The IEEE 802.1 working group has also published a specification that defines a local MAC address space structure, known as the Structured Local Address Plan (SLAP). This structure designates a range of local MAC addresses for protocols using a Company ID (CID) assigned by the IEEE Registration Authority. Another range of local MAC addresses is designated for assignment by administrators. The specification recommends a range of local MAC addresses for use by IEEE 802 protocols [IEEE_802c].¶
Work within the IEEE 802.1 Security task group on privacy recommendations for all IEEE 802 network technologies has also looked into general recommendations on identifiers, reaching the conclusion that temporary and transient identifiers are preferably in network technology design if there are no compelling reasons of service quality for a newly introduced identifier to be permanent. This work has been specified in the recently published IEEE P802E: Recommended Practice for Privacy Considerations for IEEE 802 Technologies [IEEE_802E]. The IEEE P802E specification will form part of the basis for the review of user privacy solutions applicable to IEEE Std 802.11 (aka Wi-Fi) devices as part of the RCM [rcm_privacy_csd] efforts.¶
Currently, two task groups in IEEE 802.11 are dealing with issues related to RCM:¶
At the Wireless Broadband Alliance (WBA), the Testing and Interoperability Work Group has been looking at the issues related to MAC address randomization and has identified a list of potential impacts of these changes to existing systems and solutions, mainly related to Wi-Fi identification.¶
As part of this work, WBA has documented a set of use cases that a Wi-Fi Identification Standard should address in order to scale and achieve longer term sustainability of deployed services. A first version of this document has been liaised with the IETF as part of the MAC Address Device Identification for Network and Application Services (MADINAS) activities through the "Wi-Fi Identification In a post MAC Randomization Era v1.0" paper [wba_paper].¶
Several IP address assignment mechanisms such as the IPv6 stateless autoconfiguration techniques (SLAAC) [RFC4862] generate the Interface Identifier (IID) of the address from its MAC address (via EUI64), which then becomes visible to all IPv6 communication peers. This potentially allows for global tracking of a device at L3 from any point on the Internet. Besides, the prefix part of the address provides meaningful insights of the physical location of the device in general, which together with the MAC address-based IID, makes it easier to perform global device tracking.¶
There are some solutions that might mitigate this privacy threat, such as the use of temporary addresses [RFC4191], the use of opaque IIDs [RFC7217], [I-D.gont-6man-deprecate-eui64-based-addresses]. Next, we briefly describe how these solutions work.¶
[RFC4191] identifies and describes the privacy issues associated with embedding MAC stable addressing information into the IPv6 addresses (as part of the IID) and describes some mechanisms to mitigate the associated problems. The specification is meant for IPv6 nodes that auto-configure IPv6 addresses based on the MAC address (EUI-64 mechanism). It defines how to create additional addresses (generally known as "temporary addresses") based on a random interface identifier for the purpose of initiating outgoing sessions. These "random" or temporary addresses are meant to be used for a short period of time (hours to days) and would then be deprecated. Deprecated addresses can continue to be used for already established connections, but are not used to initiate new connections. New temporary addresses are generated periodically to replace temporary addresses that expire. In order to do so, a node produces a sequence of temporary global scope addresses from a sequence of interface identifiers that appear to be random in the sense that it is difficult for an outside observer to predict a future address (or identifier) based on a current one, and it is difficult to determine previous addresses (or identifiers) knowing only the present one. The main problem with the temporary addresses is that they should not be used by applications that listen for incoming connections (as these are supposed to be waiting on permanent/well-known identifiers). Besides, if a node changes network and comes back to a previously visited one, the temporary addresses that the node would use will be different, and this might be an issue in certain networks where addresses are used for operational purposes (e.g., filtering or authentication). [RFC7217], summarized next, partially addresses the problems aforementioned.¶
[RFC7217] defines a method for generating IPv6 IIDs to be used with IPv6 Stateless Address Autoconfiguration (SLAAC), such that an IPv6 address configured using this method is stable within each subnet, but the corresponding IID changes when the host moves from one network to another. This method is meant to be an alternative to generating Interface Identifiers based on MAC addresses, such that the benefits of stable addresses can be achieved without sacrificing the security and privacy of users. The method defined to generate the IPv6 IID is based on computing a hash function which takes as input information that is stable and associated to the interface (e.g., MAC address or local interface identifier), stable information associated to the visited network (e.g., IEEE 802.11 SSID), the IPv6 prefix, and a secret key, plus some other additional information. This basically ensures that a different IID is generated when any of the input fields changes (such as the network or the prefix), but that the IID is the same within each subnet.¶
In addition to the former documents, [RFC8947] proposes an extension to DHCPv6 that allows a scalable approach to link-layer address assignments where preassigned link-layer address assignments (such as by a manufacturer) are not possible or unnecessary. [RFC8948] proposes extensions to DHCPv6 protocols to enable a DHCPv6 client or a DHCPv6 relay to indicate a preferred SLAP quadrant to the server, so that the server may allocate MAC addresses in the quadrant requested by the relay or client.¶
Not only MAC and IP addresses can be used for tracking purposes. Some DHCP options carry unique identifiers. These identifiers can enable device tracking even if the device administrator takes care of randomizing other potential identifications like link-layer addresses or IPv6 addresses. [RFC7844] introduces anonymity profiles, designed for clients that wish to remain anonymous to the visited network. The profiles provide guidelines on the composition of DHCP or DHCPv6 messages, designed to minimize disclosure of identifying information. [RFC7844] also indicates that the link-layer address, IP address, and DHCP identifier shall evolve in synchrony.¶
Since this content can evolve with time, it is now hosted at https://github.com/ietf-wg-madinas/draft-ietf-madinas-mac-address-randomization/blob/main/OS-current-practices.md¶
This section documents different policies for MAC address selection. Note that some OSes might use combination of multiple of these policies.¶
Note about the used naming convention: the "M" in MAC is included in the acronym, but not the "A" from address. This allows one to talk about a PVOM Address, or PNGM Address.¶
The names are all in the form for per-period-of-time-selection.¶
This form of MAC address selection is the historical default.¶
The vendor obtains an Organizationally Unique Identifier (OUI) from the IEEE. This has been a 24-bit prefix (including two upper bits which are set specifically) that is assigned to the vendor. The vendor generates a unique 24-bit value for the lower 24-bits, forming the 48-bit MAC address. It has not been unusual for the 24-bit value to be taken as an incrementing counter, assigned at the factory, and burnt into non-volatile storage.¶
Note that 802.15.4 use 64-bit MAC addresses, and the IEEE assigns 32-bit prefixes. The IEEE has indicated that there may be a future Ethernet specification using 64-bit MAC addresses.¶
This form of MAC address is randomly generated by the device, usually upon first boot. The resulting MAC address is stored in non-volatile storage and is used for the rest of the device lifetime.¶
This form of MAC address is randomly generated by the device, each time the device is booted. The resulting MAC address is *not* stored in non-volatile storage. It does not persist across power cycles. This case may sometimes be a PDGM where the non-volatile storage is no longer functional (or has failed).¶
This form of MAC address is generated each time a new network connection is created.¶
This is typically used with WiFi (802.11) networks where the network is identified by an SSID Name. The generated address is stored on non-volatile storage, indexed by the SSID. Each time the device returns to a network with the same SSID, the device uses the saved MAC address.¶
It is possible to use PNGM for wired Ethernet connections through some passive observation of network traffic, such as STP, LLDP, DHCP or Router Advertisements to determine which network has been attached.¶
This form of MAC address is generated periodically. Typical numbers are around every twelve hours. Like PNGM, it is used primarily with WiFi (802.11).¶
When the MAC address changes, the station disconnects from the current session and reconnects using the new MAC address. This will involve a new WPA/802.1x session: new EAP, TLS, etc. negotiations. A new DHCP, Router-Advertisement will be done. TBD: it is unclear if any TLS session-resumption ticket (used by EAP-TLS) can or should be retained across a change of the MAC address.¶
If DHCP is used, then a new DUID is generated so as to not link to the previous connection, and the result is usually new IP addresses allocated.¶
This form of MAC address is generated on a per session basis. Like PNGM, it is used primarily with WiFi (802.11).¶
Since the address changes only when a new session is established, there is no disconnection/reconnection involved.¶
N/A.¶
Privacy considerations regarding tracking the location of a user through the MAC address of this device are discussed throughout this document. Given the informational nature of this document, no protocols/solutions are specified, but current state of affairs is documented.¶
Any future specification in this are would have to look into security and privacy aspects, such as, but not limited to: i) mitigating the problem of location privacy while minimizing the impact on upper layers of the protocol stack; ii) providing means to network operators to authenticate devices and authorize network access despite the MAC addresses changing following some pattern; and, iii) provide means for the device not to use MAC addresses it is not authorized to use or that are currently in use.¶
Authors would like to thank Guillermo Sanchez Illan for the extensive tests performed on different OSes to analyze their behavior regarding address randomization.¶
Authors would like to thank Jerome Henry and Hai Shalom for their review and comments on previous versions of this document. Authors would also like to thank Michael Richardson for his contributions on the taxonomy section.¶