Network Working Group F. Günther Internet-Draft ETH Zurich Intended status: Informational M. Thomson Expires: 2 December 2023 Mozilla C. A. Wood Cloudflare 31 May 2023 Usage Limits on AEAD Algorithms draft-irtf-cfrg-aead-limits-07 Abstract An Authenticated Encryption with Associated Data (AEAD) algorithm provides confidentiality and integrity. Excessive use of the same key can give an attacker advantages in breaking these properties. This document provides simple guidance for users of common AEAD functions about how to limit the use of keys in order to bound the advantage given to an attacker. It considers limits in both single- and multi-key settings. Discussion Venues This note is to be removed before publishing as an RFC. Discussion of this document takes place on the Crypto Forum Research Group mailing list (cfrg@ietf.org), which is archived at https://mailarchive.ietf.org/arch/search/?email_list=cfrg. Source for this draft and an issue tracker can be found at https://github.com/cfrg/draft-irtf-cfrg-aead-limits. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." Günther, et al. Expires 2 December 2023 [Page 1] Internet-Draft AEAD Limits May 2023 This Internet-Draft will expire on 2 December 2023. Copyright Notice Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Requirements Notation . . . . . . . . . . . . . . . . . . . . 4 3. Notation . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4. Calculating Limits . . . . . . . . . . . . . . . . . . . . . 6 4.1. Approximations . . . . . . . . . . . . . . . . . . . . . 7 5. Single-Key AEAD Limits . . . . . . . . . . . . . . . . . . . 8 5.1. AEAD_AES_128_GCM and AEAD_AES_256_GCM . . . . . . . . . . 9 5.1.1. Confidentiality Limit . . . . . . . . . . . . . . . . 9 5.1.2. Integrity Limit . . . . . . . . . . . . . . . . . . . 9 5.2. AEAD_CHACHA20_POLY1305 . . . . . . . . . . . . . . . . . 9 5.3. AEAD_AES_128_CCM . . . . . . . . . . . . . . . . . . . . 10 5.3.1. Confidentiality Limit . . . . . . . . . . . . . . . . 10 5.3.2. Integrity Limit . . . . . . . . . . . . . . . . . . . 10 5.4. AEAD_AES_128_CCM_8 . . . . . . . . . . . . . . . . . . . 10 5.5. Single-Key Examples . . . . . . . . . . . . . . . . . . . 11 6. Multi-Key AEAD Limits . . . . . . . . . . . . . . . . . . . . 12 6.1. AEAD_AES_128_GCM and AEAD_AES_256_GCM . . . . . . . . . . 12 6.1.1. Authenticated Encryption Security Limit . . . . . . . 12 6.1.2. Confidentiality Limit . . . . . . . . . . . . . . . . 13 6.1.3. Integrity Limit . . . . . . . . . . . . . . . . . . . 13 6.2. AEAD_CHACHA20_POLY1305 . . . . . . . . . . . . . . . . . 14 6.2.1. Authenticated Encryption Security Limit . . . . . . . 14 6.2.2. Confidentiality Limit . . . . . . . . . . . . . . . . 14 6.2.3. Integrity Limit . . . . . . . . . . . . . . . . . . . 14 6.3. AEAD_AES_128_CCM and AEAD_AES_128_CCM_8 . . . . . . . . . 15 6.4. Multi-Key Examples . . . . . . . . . . . . . . . . . . . 15 7. Security Considerations . . . . . . . . . . . . . . . . . . . 16 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 17 9. References . . . . . . . . . . . . . . . . . . . . . . . . . 17 9.1. Normative References . . . . . . . . . . . . . . . . . . 17 9.2. Informative References . . . . . . . . . . . . . . . . . 19 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 19 Günther, et al. Expires 2 December 2023 [Page 2] Internet-Draft AEAD Limits May 2023 1. Introduction An Authenticated Encryption with Associated Data (AEAD) algorithm provides confidentiality and integrity. [RFC5116] specifies an AEAD as a function with four inputs -- secret key, nonce, plaintext, associated data (of which plaintext and associated data can optionally be zero-length) -- that produces ciphertext output and an error code indicating success or failure. The ciphertext is typically composed of the encrypted plaintext bytes and an authentication tag. The generic AEAD interface does not describe usage limits. Each AEAD algorithm does describe limits on its inputs, but these are formulated as strict functional limits, such as the maximum length of inputs, which are determined by the properties of the underlying AEAD composition. Degradation of the security of the AEAD as a single key is used multiple times is not given the same thorough treatment. Effective limits can be influenced by the number of "users" of a given key. In the traditional setting, there is one key shared between two parties. Any limits on the maximum length of inputs or encryption operations apply to that single key. The attacker's goal is to break security (confidentiality or integrity) of that specific key. However, in practice, there are often many users with independent keys. This multi-key security setting, often referred to as the multi-user setting in the academic literature, considers an attacker's advantage in breaking security of any of these many keys, further assuming the attacker may have done some offline work to help break security. As a result, AEAD algorithm limits may depend on offline work and the number of keys. However, given that a multi-key attacker does not target any specific key, acceptable advantages may differ from that of the single-key setting. The number of times a single pair of key and nonce can be used might also be relevant to security. For some algorithms, such as AEAD_AES_128_GCM or AEAD_AES_256_GCM, this limit is 1 and using the same pair of key and nonce has serious consequences for both confidentiality and integrity; see [NonceDisrespecting]. Nonce-reuse resistant algorithms like AEAD_AES_128_GCM_SIV can tolerate a limited amount of nonce reuse. Günther, et al. Expires 2 December 2023 [Page 3] Internet-Draft AEAD Limits May 2023 It is good practice to have limits on how many times the same key (or pair of key and nonce) are used. Setting a limit based on some measurable property of the usage, such as number of protected messages or amount of data transferred, ensures that it is easy to apply limits. This might require the application of simplifying assumptions. For example, TLS 1.3 and QUIC both specify limits on the number of records that can be protected, using the simplifying assumption that records are the same size; see Section 5.5 of [TLS] and Section 6.6 of [RFC9001]. Exceeding the determined usage limit can be avoided using rekeying. Rekeying uses a lightweight transform to produce new keys. Rekeying effectively resets progress toward single-key limits, allowing a session to be extended without degrading security. Rekeying can also provide a measure of forward and backward (post-compromise) security. [RFC8645] contains a thorough survey of rekeying and the consequences of different design choices. Currently, AEAD limits and usage requirements are scattered among peer-reviewed papers, standards documents, and other RFCs. Determining the correct limits for a given setting is challenging as papers do not use consistent labels or conventions, and rarely apply any simplifications that might aid in reaching a simple limit. The intent of this document is to collate all relevant information about the proper usage and limits of AEAD algorithms in one place. This may serve as a standard reference when considering which AEAD algorithm to use, and how to use it. 2. Requirements Notation The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 3. Notation This document defines limitations in part using the quantities in Table 1 below. Günther, et al. Expires 2 December 2023 [Page 4] Internet-Draft AEAD Limits May 2023 +========+====================================================+ | Symbol | Description | +========+====================================================+ | n | AEAD block length (in bits) | +--------+----------------------------------------------------+ | k | AEAD key length (in bits) | +--------+----------------------------------------------------+ | r | AEAD nonce length (in bits) | +--------+----------------------------------------------------+ | t | Size of the authentication tag (in bits) | +--------+----------------------------------------------------+ | L | Maximum length of each message (in blocks) | +--------+----------------------------------------------------+ | s | Total plaintext length in all messages (in blocks) | +--------+----------------------------------------------------+ | q | Number of protected messages (AEAD encryption | | | invocations) | +--------+----------------------------------------------------+ | v | Number of attacker forgery attempts (failed AEAD | | | decryption invocations) | +--------+----------------------------------------------------+ | p | Upper bound on adversary attack probability | +--------+----------------------------------------------------+ | o | Offline adversary work (in number of encryption | | | and decryption queries; multi-key setting only) | +--------+----------------------------------------------------+ | u | Number of keys (multi-key setting only) | +--------+----------------------------------------------------+ | B | Maximum number of blocks encrypted by any key | | | (multi-key setting only) | +--------+----------------------------------------------------+ Table 1: Notation For each AEAD algorithm, we define the (passive) confidentiality and (active) integrity advantage roughly as the advantage an attacker has in breaking the corresponding classical security property for the algorithm. A passive attacker can query ciphertexts for arbitrary plaintexts. An active attacker can additionally query plaintexts for arbitrary ciphertexts. Moreover, we define the combined authenticated encryption advantage guaranteeing both confidentiality and integrity against an active attacker. Specifically: Günther, et al. Expires 2 December 2023 [Page 5] Internet-Draft AEAD Limits May 2023 * Confidentiality advantage (CA): The probability of a passive attacker succeeding in breaking the confidentiality properties (IND-CPA) of the AEAD scheme. In this document, the definition of confidentiality advantage roughly is the probability that an attacker successfully distinguishes the ciphertext outputs of the AEAD scheme from the outputs of a random function. * Integrity advantage (IA): The probability of an active attacker succeeding in breaking the integrity properties (INT-CTXT) of the AEAD scheme. In this document, the definition of integrity advantage roughly is the probability that an attacker is able to forge a ciphertext that will be accepted as valid. * Authenticated Encryption advantage (AEA): The probability of an active attacker succeeding in breaking the authenticated- encryption properties of the AEAD scheme. In this document, the definition of authenticated encryption advantage roughly is the probability that an attacker successfully distinguishes the ciphertext outputs of the AEAD scheme from the outputs of a random function or is able to forge a ciphertext that will be accepted as valid. See [AEComposition], [AEAD] for the formal definitions of and relations between passive confidentiality (IND-CPA), ciphertext integrity (INT-CTXT), and authenticated encryption security (AE). The authenticated encryption advantage subsumes, and can be derived as the combination of, both CA and IA: CA <= AEA IA <= AEA AEA <= CA + IA Each application requires an individual determination of limits in order to keep CA and IA sufficiently small. For instance, TLS aims to keep CA below 2^-60 and IA below 2^-57 in the single-key setting; see Section 5.5 of [TLS]. 4. Calculating Limits Once upper bounds on CA, IA, or AEA are determined, this document defines a process for determining three overall operational limits: * Confidentiality limit (CL): The number of messages an application can encrypt before giving the adversary a confidentiality advantage higher than CA. Günther, et al. Expires 2 December 2023 [Page 6] Internet-Draft AEAD Limits May 2023 * Integrity limit (IL): The number ciphertexts an application can decrypt, either successfully or not, before giving the adversary an integrity advantage higher than IA. * Authenticated encryption limit (AEL): The combined number of messages and number of ciphertexts an application can encrypt or decrypt before giving the adversary an authenticated encryption advantage higher than AEA. When limits are expressed as a number of messages an application can encrypt or decrypt, this requires assumptions about the size of messages and any authenticated additional data (AAD). Limits can instead be expressed in terms of the number of bytes, or blocks, of plaintext and maybe AAD in total. To aid in translating between message-based and byte/block-based limits, a formulation of limits that includes a maximum message size (L) and the AEAD schemes' block length in bits (n) is provided. All limits are based on the total number of messages, either the number of protected messages (q) or the number of forgery attempts (v); which correspond to CL and IL respectively. Limits are then derived from those bounds using a target attacker probability. For example, given an integrity advantage of IA = v * (8L / 2^106) and a targeted maximum attacker success probability of IA = p, the algorithm remains secure, i.e., the adversary's advantage does not exceed the targeted probability of success, provided that v <= (p * 2^106) / 8L. In turn, this implies that v <= (p * 2^103) / L is the corresponding limit. To apply these limits, implementations can count the number of messages that are protected or rejected against the determined limits (q and v respectively). This requires that messages cannot exceed the maximum message size (L) that is chosen. 4.1. Approximations This analysis assumes a message-based approach to setting limits. Implementations that use byte counting rather than message counting could use a maximum message size (L) of one to determine a limit for the number of protected messages (q) that can be applied with byte counting. This results in attributing per-message overheads to every byte, so the resulting limit could be significantly lower than necessary. Actions, like rekeying, that are taken to avoid the limit might occur more often as a result. Günther, et al. Expires 2 December 2023 [Page 7] Internet-Draft AEAD Limits May 2023 To simplify formulae, estimates in this document elide terms that contribute negligible advantage to an attacker relative to other terms. In other respects, this document seeks to make conservative choices that err on the side of overestimating attacker advantage. Some of these assumptions are present in the papers that this work is based on. For instance, analyses are simplified by using a single message size that covers both AAD and plaintext. AAD can contribute less toward attacker advantage for confidentiality limits, so applications where AAD comprises a significant proportion of messages might find the estimates provided to be slightly more conservative than necessary to meet a given goal. This document assumes the use of non-repeating nonces. The modes covered here are not robust if the same nonce and key are used to protect different messages, so deterministic generation of nonces from a counter or similar techniques is strongly encouraged. If an application cannot guarantee that nonces will not repeat, a nonce- misuse resistant AEAD like AES-GCM-SIV [SIV] is likely to be a better choice. 5. Single-Key AEAD Limits This section summarizes the confidentiality and integrity bounds and limits for modern AEAD algorithms used in IETF protocols, including: AEAD_AES_128_GCM [RFC5116], AEAD_AES_256_GCM [RFC5116], AEAD_AES_128_CCM [RFC5116], AEAD_CHACHA20_POLY1305 [RFC8439], AEAD_AES_128_CCM_8 [RFC6655]. The limits in this section apply to using these schemes with a single key; for settings where multiple keys are deployed (for example, when rekeying within a connection), see Section 6. These algorithms, as cited, all define a nonce length (r) of 96 bits. Some definitions of these AEAD algorithms allow for other nonce lengths, but the analyses in this document all fix the nonce length to r = 96. Using other nonce lengths might result in different bounds; for example, [GCMProofs] shows that using a variable-length nonce for AES-GCM results in worse security bounds. The CL and IL values bound the total number of encryption and forgery queries (q and v). Alongside each advantage value, we also specify these bounds. Günther, et al. Expires 2 December 2023 [Page 8] Internet-Draft AEAD Limits May 2023 5.1. AEAD_AES_128_GCM and AEAD_AES_256_GCM The CL and IL values for AES-GCM are derived in [AEBounds] and summarized below. For this AEAD, n = 128 and t = 128 [GCM]. In this example, the length s is the sum of AAD and plaintext (in blocks of 128 bits), as described in [GCMProofs]. 5.1.1. Confidentiality Limit CA <= ((s + q + 1)^2) / 2^129 This implies the following usage limit: q + s <= p^(1/2) * 2^(129/2) - 1 Which, for a message-based protocol with s <= q * L, if we assume that every packet is size L (in blocks of 128 bits), produces the limit: q <= (p^(1/2) * 2^(129/2) - 1) / (L + 1) 5.1.2. Integrity Limit Applying Equation (22) from [GCMProofs], in which the assumption of s + q + v < 2^64 ensures that the delta function cannot produce a value greater than 2, the following bound applies: IA <= 2 * (v * (L + 1)) / 2^128 This implies the following limit: v <= (p * 2^127) / (L + 1) 5.2. AEAD_CHACHA20_POLY1305 The known single-user analyses for AEAD_CHACHA20_POLY1305 [ChaCha20Poly1305-SU], [ChaCha20Poly1305-MU] combine the confidentiality and integrity limits into a single expression, covered below. For this AEAD, n = 512, k = 256, and t = 128; the length L is the sum of AAD and plaintext (in blocks of 128 bits), see [ChaCha20Poly1305-MU]. AEA <= (v * (L + 1)) / 2^103 This advantage is a tight reduction based on the underlying Poly1305 PRF [Poly1305]. It implies the following limit: v <= (p * 2^103) / (L + 1) Günther, et al. Expires 2 December 2023 [Page 9] Internet-Draft AEAD Limits May 2023 5.3. AEAD_AES_128_CCM The CL and IL values for AEAD_AES_128_CCM are derived from [CCM-ANALYSIS] and specified in the QUIC-TLS mapping specification [RFC9001]. This analysis uses the total number of underlying block cipher operations to derive its bound. For CCM, this number is the sum of: the length of the associated data in blocks, the length of the ciphertext in blocks, the length of the plaintext in blocks, plus 1. In the following limits, this is simplified to a value of twice the length of the packet in blocks, i.e., 2L represents the effective length, in number of block cipher operations, of a message with L blocks. This simplification is based on the observation that common applications of this AEAD carry only a small amount of associated data compared to ciphertext. For example, QUIC has 1 to 3 blocks of AAD. For this AEAD, n = 128 and t = 128. 5.3.1. Confidentiality Limit CA <= (2L * q)^2 / 2^n <= (2L * q)^2 / 2^128 This implies the following limit: q <= sqrt((p * 2^126) / L^2) 5.3.2. Integrity Limit IA <= v / 2^t + (2L * (v + q))^2 / 2^n <= v / 2^128 + (2L * (v + q))^2 / 2^128 This implies the following limit: v + (2L * (v + q))^2 <= p * 2^128 In a setting where v or q is sufficiently large, v is negligible compared to (2L * (v + q))^2, so this this can be simplified to: v + q <= sqrt(p) * 2^63 / L 5.4. AEAD_AES_128_CCM_8 The analysis in [CCM-ANALYSIS] also applies to this AEAD, but the reduced tag length of 64 bits changes the integrity limit calculation considerably. Günther, et al. Expires 2 December 2023 [Page 10] Internet-Draft AEAD Limits May 2023 IA <= v / 2^t + (2L * (v + q))^2 / 2^n <= v / 2^64 + (2L * (v + q))^2 / 2^128 This results in reducing the limit on v by a factor of 2^64. v * 2^64 + (2L * (v + q))^2 <= p * 2^128 5.5. Single-Key Examples An example protocol might choose to aim for a single-key CA and IA that is at most 2^-50. If the messages exchanged in the protocol are at most a common Internet MTU of around 1500 bytes, then a value for L might be set to 2^7. Table 2 shows limits for q and v that might be chosen under these conditions. +========================+===========+===========+ | AEAD | Maximum q | Maximum v | +========================+===========+===========+ | AEAD_AES_128_GCM | 2^32.5 | 2^71 | +------------------------+-----------+-----------+ | AEAD_AES_256_GCM | 2^32.5 | 2^71 | +------------------------+-----------+-----------+ | AEAD_CHACHA20_POLY1305 | n/a | 2^46 | +------------------------+-----------+-----------+ | AEAD_AES_128_CCM | 2^30 | 2^30 | +------------------------+-----------+-----------+ | AEAD_AES_128_CCM_8 | 2^30.9 | 2^13 | +------------------------+-----------+-----------+ Table 2: Example single-key limits AEAD_CHACHA20_POLY1305 provides no limit to q based on the provided single-user analyses. The limit for q on AEAD_AES_128_CCM and AEAD_AES_128_CCM_8 is reduced due to a need to reduce the value of q to ensure that IA does not exceed the target. This assumes equal proportions for q and v for AEAD_AES_128_CCM. AEAD_AES_128_CCM_8 permits a much smaller value of v due to the shorter tag, which permits a higher limit for q. Some protocols naturally limit v to 1, such as TCP-based variants of TLS, which terminate sessions on decryption failure. If v is limited to 1, q can be increased to 2^31 for both CCM AEADs. Günther, et al. Expires 2 December 2023 [Page 11] Internet-Draft AEAD Limits May 2023 6. Multi-Key AEAD Limits In the multi-key setting, each user is assumed to have an independent and uniformly distributed key, though nonces may be re-used across users with some very small probability. The success probability in attacking one of these many independent keys can be generically bounded by the success probability of attacking a single key multiplied by the number of keys present [MUSecurity], [GCM-MU]. Absent concrete multi-key bounds, this means the attacker advantage in the multi-key setting is the product of the single-key advantage and the number of keys. This section summarizes the confidentiality and integrity bounds and limits for the same algorithms as in Section 5 for the multi-key setting. The CL and IL values bound the total number of encryption and forgery queries (q and v). Alongside each value, we also specify these bounds. 6.1. AEAD_AES_128_GCM and AEAD_AES_256_GCM Concrete multi-key bounds for AEAD_AES_128_GCM and AEAD_AES_256_GCM exist due to Theorem 4.3 in [GCM-MU2], which covers protocols with nonce randomization, like TLS 1.3 [TLS] and QUIC [RFC9001]. Here, the full nonce is XORed with a secret, random offset. The bound for nonce randomization was further improved in [ChaCha20Poly1305-MU]. Results for AES-GCM with random, partially implicit nonces [RFC5288] are captured by Theorem 5.3 in [GCM-MU2], which apply to protocols such as TLS 1.2 [RFC5246]. Here, the implicit part of the nonce is a random value, of length at least 32 bits and fixed per key, while we assume that the explicit part of the nonce is chosen using a non- repeating process. The full nonce is the concatenation of the two parts. This produces similar limits under most conditions. Note that implementations that choose the explicit part at random have a higher chance of nonce collisions and are not considered for the limits in this section. For this AEAD, n = 128, t = 128, and r = 96; the key length is k = 128 or k = 256 for AEAD_AES_128_GCM and AEAD_AES_128_GCM respectively. 6.1.1. Authenticated Encryption Security Limit Protocols with nonce randomization have a limit of: AEA <= (q+v)*L*B / 2^127 This implies the following limit: Günther, et al. Expires 2 December 2023 [Page 12] Internet-Draft AEAD Limits May 2023 q + v <= p * 2^127 / (L * B) This assumes that B is much larger than 100; that is, each user enciphers significantly more than 1600 bytes of data. Otherwise, B should be increased by 161 for AEAD_AES_128_GCM and by 97 for AEAD_AES_256_GCM. Protocols with random, partially implicit nonces have the following limit, which is similar to that for nonce randomization: AEA <= (((q+v)*o + (q+v)^2) / 2^(k+26)) + ((q+v)*L*B / 2^127) The first term is negligible if k = 256; this implies the following simplified limits: AEA <= (q+v)*L*B / 2^127 q + v <= p * 2^127 / (L * B) For k = 128, assuming o <= q + v (i.e., that the attacker does not spend more work than all legitimate protocol users together), the limits are: AEA <= (((q+v)*o + (q+v)^2) / 2^154) + ((q+v)*L*B / 2^127) q + v <= min( sqrt(p) * 2^76, p * 2^126 / (L * B) ) 6.1.2. Confidentiality Limit The confidentiality advantage is essentially dominated by the same term as the AE advantage for protocols with nonce randomization: CA <= q*L*B / 2^127 This implies the following limit: q <= p * 2^127 / (L * B) Similarly, the limits for protocols with random, partially implicit nonces are: CA <= ((q*o + q^2) / 2^(k+26)) + (q*L*B / 2^127) q <= min( sqrt(p) * 2^76, p * 2^126 / (L * B) ) 6.1.3. Integrity Limit There is currently no dedicated integrity multi-key bound available for AEAD_AES_128_GCM and AEAD_AES_256_GCM. The AE limit can be used to derive an integrity limit as: Günther, et al. Expires 2 December 2023 [Page 13] Internet-Draft AEAD Limits May 2023 IA <= AEA Section 6.1.1 therefore contains the integrity limits. 6.2. AEAD_CHACHA20_POLY1305 Concrete multi-key bounds for AEAD_CHACHA20_POLY1305 are given in Theorem 7.8 in [ChaCha20Poly1305-MU], covering protocols with nonce randomization like TLS 1.3 [TLS] and QUIC [RFC9001]. For this AEAD, n = 512, k = 256, t = 128, and r = 96; the length (L) is the sum of AAD and plaintext (in blocks of 128 bits). 6.2.1. Authenticated Encryption Security Limit Protocols with nonce randomization have a limit of: AEA <= (v * (L + 1)) / 2^103 It implies the following limit: v <= (p * 2^103) / (L + 1) Note that this is the same limit as in the single-user case except that the total number of forgery attempts (v) and maximum message length in blocks (L) is calculated across all used keys. 6.2.2. Confidentiality Limit While the AE advantage is dominated by the number of forgery attempts v, those are irrelevant for the confidentiality advantage. The relevant limit for protocols with nonce randomization becomes dominated, at a very low level, by the adversary's offline work o and the number of protected messages q across all used keys: CA <= (o + q) / 2^247) This implies the following simplified limit, which for most reasonable values of p is dominated by a technical limitation of approximately q = 2^100: q <= min( p * 2^247 - o, 2^100 ) 6.2.3. Integrity Limit The AE limit for AEAD_CHACHA20_POLY1305 essentially is the integrity (multi-key) bound. The former hence also applies to the latter: Günther, et al. Expires 2 December 2023 [Page 14] Internet-Draft AEAD Limits May 2023 IA <= AEA Section 6.2.1 therefore contains the integrity limits. 6.3. AEAD_AES_128_CCM and AEAD_AES_128_CCM_8 There are currently no concrete multi-key bounds for AEAD_AES_128_CCM or AEAD_AES_128_CCM_8. Thus, to account for the additional factor u, i.e., the number of keys, each p term in the confidentiality and integrity limits is replaced with p / u. The multi-key integrity limit for AEAD_AES_128_CCM is as follows. v + q <= sqrt(p / u) * 2^63 / L Likewise, the multi-key integrity limit for AEAD_AES_128_CCM_8 is as follows. v * 2^64 + (2L * (v + q))^2 <= (p / u) * 2^128 6.4. Multi-Key Examples An example protocol might choose to aim for a multi-key AEA, CA, and IA that is at most 2^-50. If the messages exchanged in the protocol are at most a common Internet MTU of around 1500 bytes, then a value for L might be set to 2^7. Table 3 shows limits for q and v across all keys that might be chosen under these conditions. +========================+================+==============+ | AEAD | Maximum q | Maximum v | +========================+================+==============+ | AEAD_AES_128_GCM | 2^69/B | 2^69/B | +------------------------+----------------+--------------+ | AEAD_AES_256_GCM | 2^69/B | 2^69/B | +------------------------+----------------+--------------+ | AEAD_CHACHA20_POLY1305 | 2^100 | 2^46 | +------------------------+----------------+--------------+ | AEAD_AES_128_CCM | 2^30/sqrt(u) | 2^30/sqrt(u) | +------------------------+----------------+--------------+ | AEAD_AES_128_CCM_8 | 2^30.9/sqrt(u) | 2^13/u | +------------------------+----------------+--------------+ Table 3: Example multi-key limits Günther, et al. Expires 2 December 2023 [Page 15] Internet-Draft AEAD Limits May 2023 The limits for AEAD_AES_128_GCM, AEAD_AES_256_GCM, AEAD_AES_128_CCM, and AEAD_AES_128_CCM_8 assume equal proportions for q and v. The limits for AEAD_AES_128_GCM, AEAD_AES_256_GCM and AEAD_CHACHA20_POLY1305 assume the use of nonce randomization, like in TLS 1.3 [TLS] and QUIC [RFC9001]. The limits for AEAD_AES_128_GCM and AEAD_AES_256_GCM further depend on the maximum number (B) of 128-bit blocks encrypted by any single key. For example, limiting the number of messages (of size <= 2^7 blocks) to at most 2^20 (about a million) per key results in B of 2^27, which limits both q and v to 2^42 messages. Only the limits for AEAD_AES_128_CCM and AEAD_AES_128_CCM_8 depend on the number of used keys (u), which further reduces them considerably. If v is limited to 1, q can be increased to 2^31/sqrt(u) for both CCM AEADs. 7. Security Considerations The different analyses of AEAD functions that this work is based upon generally assume that the underlying primitives are ideal. For example, that a pseudorandom function (PRF) used by the AEAD is indistinguishable from a truly random function or that a pseudorandom permutation (PRP) is indistinguishable from a truly random permutation. Thus, the advantage estimates assume that the attacker is not able to exploit a weakness in an underlying primitive. Many of the formulae in this document depend on simplifying assumptions, from differing models, which means that results are not universally applicable. When using this document to set limits, it is necessary to validate all these assumptions for the setting in which the limits might apply. In most cases, the goal is to use assumptions that result in setting a more conservative limit, but this is not always the case. As an example of one such simplification, this document defines v as the total number of failed decryption queries (that is, failed forgery attempts), whereas models usually include all forgery attempts when determining v. The CA, IA, and AEA values defined in this document are upper bounds based on existing cryptographic research. Future analysis may introduce tighter bounds. Applications SHOULD NOT assume these bounds are rigid, and SHOULD accommodate changes. In particular, in two-party communication, one participant cannot regard apparent overuse of a key by other participants as being in error, when it could be that the other participant has better information about bounds. Günther, et al. Expires 2 December 2023 [Page 16] Internet-Draft AEAD Limits May 2023 Note that the limits in this document apply to the adversary's ability to conduct a single successful forgery. For some algorithms and in some cases, an adversary's success probability in repeating forgeries may be noticeably larger than that of the first forgery. As an example, [MF05] describes such multiple forgery attacks in the context of AES-GCM in more detail. 8. IANA Considerations This document does not make any request of IANA. 9. References 9.1. Normative References [AEAD] Rogaway, P., "Authenticated-Encryption with Associated- Data", September 2002, . [AEBounds] Luykx, A. and K. Paterson, "Limits on Authenticated Encryption Use in TLS", 8 March 2016, . [AEComposition] Bellare, M. and C. Namprempre, "Authenticated Encryption: Relations among notions and analysis of the generic composition paradigm", July 2007, . [CCM-ANALYSIS] Jonsson, J., "On the Security of CTR + CBC-MAC", Selected Areas in Cryptography pp. 76-93, DOI 10.1007/3-540-36492-7_7, 2003, . [ChaCha20Poly1305-MU] Degabriele, J. P., Govinden, J., Günther, F., and K. G. Paterson, "The Security of ChaCha20-Poly1305 in the Multi- user Setting", 24 January 2023, . [ChaCha20Poly1305-SU] Procter, G., "A Security Analysis of the Composition of ChaCha20 and Poly1305", 11 August 2014, . Günther, et al. Expires 2 December 2023 [Page 17] Internet-Draft AEAD Limits May 2023 [GCM] Dworkin, M., "Recommendation for Block Cipher Modes of Operation: Galois/Counter Mode (GCM) and GMAC", NIST Special Publication 800-38D, November 2007. [GCM-MU] Bellare, M. and B. Tackmann, "The Multi-User Security of Authenticated Encryption: AES-GCM in TLS 1.3", 27 November 2017, . [GCM-MU2] Hoang, V. T., Tessaro, S., and A. Thiruvengadam, "The Multi-user Security of GCM, Revisited: Tight Bounds for Nonce Randomization", 15 October 2018, . [GCMProofs] Iwata, T., Ohashi, K., and K. Minematsu, "Breaking and Repairing GCM Security Proofs", 1 August 2012, . [MUSecurity] Bellare, M., Boldyreva, A., and S. Micali, "Public-Key Encryption in a Multi-user Setting: Security Proofs and Improvements", May 2000, . [Poly1305] Bernstein, D., "The Poly1305-AES Message-Authentication Code", Fast Software Encryption pp. 32-49, DOI 10.1007/11502760_3, 2005, . [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC5116] McGrew, D., "An Interface and Algorithms for Authenticated Encryption", RFC 5116, DOI 10.17487/RFC5116, January 2008, . [RFC6655] McGrew, D. and D. Bailey, "AES-CCM Cipher Suites for Transport Layer Security (TLS)", RFC 6655, DOI 10.17487/RFC6655, July 2012, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . Günther, et al. Expires 2 December 2023 [Page 18] Internet-Draft AEAD Limits May 2023 [RFC8439] Nir, Y. and A. Langley, "ChaCha20 and Poly1305 for IETF Protocols", RFC 8439, DOI 10.17487/RFC8439, June 2018, . 9.2. Informative References [MF05] McGrew, D. A. and S. R. Fluhrer, "Multiple forgery attacks against Message Authentication Codes", 31 May 2005, . [NonceDisrespecting] Bock, H., Zauner, A., Devlin, S., Somorovsky, J., and P. Jovanovic, "Nonce-Disrespecting Adversaries -- Practical Forgery Attacks on GCM in TLS", 17 May 2016, . [RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.2", RFC 5246, DOI 10.17487/RFC5246, August 2008, . [RFC5288] Salowey, J., Choudhury, A., and D. McGrew, "AES Galois Counter Mode (GCM) Cipher Suites for TLS", RFC 5288, DOI 10.17487/RFC5288, August 2008, . [RFC8645] Smyshlyaev, S., Ed., "Re-keying Mechanisms for Symmetric Keys", RFC 8645, DOI 10.17487/RFC8645, August 2019, . [RFC9001] Thomson, M., Ed. and S. Turner, Ed., "Using TLS to Secure QUIC", RFC 9001, DOI 10.17487/RFC9001, May 2021, . [SIV] Gueron, S., Langley, A., and Y. Lindell, "AES-GCM-SIV: Nonce Misuse-Resistant Authenticated Encryption", RFC 8452, DOI 10.17487/RFC8452, April 2019, . [TLS] Rescorla, E., "The Transport Layer Security (TLS) Protocol Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018, . Authors' Addresses Günther, et al. Expires 2 December 2023 [Page 19] Internet-Draft AEAD Limits May 2023 Felix Günther ETH Zurich Email: mail@felixguenther.info Martin Thomson Mozilla Email: mt@lowentropy.net Christopher A. Wood Cloudflare Email: caw@heapingbits.net Günther, et al. Expires 2 December 2023 [Page 20]