Internet-Draft OPRFs February 2023
Davidson, et al. Expires 25 August 2023 [Page]
Workgroup:
Network Working Group
Internet-Draft:
draft-irtf-cfrg-voprf-21
Published:
Intended Status:
Informational
Expires:
Authors:
A. Davidson
Brave Software
A. Faz-Hernandez
Cloudflare, Inc.
N. Sullivan
Cloudflare, Inc.
C. A. Wood
Cloudflare, Inc.

Oblivious Pseudorandom Functions (OPRFs) using Prime-Order Groups

Abstract

An Oblivious Pseudorandom Function (OPRF) is a two-party protocol between client and server for computing the output of a Pseudorandom Function (PRF). The server provides the PRF private key, and the client provides the PRF input. At the end of the protocol, the client learns the PRF output without learning anything about the PRF private key, and the server learns neither the PRF input nor output. An OPRF can also satisfy a notion of 'verifiability', called a VOPRF. A VOPRF ensures clients can verify that the server used a specific private key during the execution of the protocol. A VOPRF can also be partially-oblivious, called a POPRF. A POPRF allows clients and servers to provide public input to the PRF computation. This document specifies an OPRF, VOPRF, and POPRF instantiated within standard prime-order groups, including elliptic curves. This document is a product of the Crypto Forum Research Group (CFRG) in the IRTF.

Discussion Venues

This note is to be removed before publishing as an RFC.

Source for this draft and an issue tracker can be found at https://github.com/cfrg/draft-irtf-cfrg-voprf.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 25 August 2023.

▲

Table of Contents

1. Introduction

A Pseudorandom Function (PRF) F(k, x) is an efficiently computable function taking a private key k and a value x as input. This function is pseudorandom if the keyed function K(_) = F(k, _) is indistinguishable from a randomly sampled function acting on the same domain and range as K(). An Oblivious PRF (OPRF) is a two-party protocol between a server and a client, where the server holds a PRF key k and the client holds some input x. The protocol allows both parties to cooperate in computing F(k, x) such that the client learns F(k, x) without learning anything about k; and the server does not learn anything about x or F(k, x). A Verifiable OPRF (VOPRF) is an OPRF wherein the server also proves to the client that F(k, x) was produced by the key k corresponding to the server's public key, which the client knows. A Partially-Oblivious PRF (POPRF) is a variant of a VOPRF wherein client and server interact in computing F(k, x, y), for some PRF F with server-provided key k, client-provided input x, and public input y, and client receives proof that F(k, x, y) was computed using k corresponding to the public key that the client knows. A POPRF with fixed input y is functionally equivalent to a VOPRF.

OPRFs have a variety of applications, including: password-protected secret sharing schemes [JKKX16], privacy-preserving password stores [SJKS17], and password-authenticated key exchange or PAKE [OPAQUE]. Verifiable OPRFs are necessary in some applications such as Privacy Pass [PRIVACYPASS]. Verifiable OPRFs have also been used for password-protected secret sharing schemes such as that of [JKK14].

This document specifies OPRF, VOPRF, and POPRF protocols built upon prime-order groups. The document describes each protocol variant, along with application considerations, and their security properties.

This document represents the consensus of the Crypto Forum Research Group (CFRG). It is not an IETF product and is not a standard.

1.1. Change log

draft-21:

  • Apply more IRSG review comments.

draft-20:

  • Address IRSG comments.

draft-19:

  • Fix error.

draft-18:

  • Apply editorial suggestions from CFRG chair review.

draft-17:

  • Change how suites are identified and finalize test vectors.
  • Apply editorial suggestions from IRTF chair review.

draft-16:

  • Apply editorial suggestions from document shepherd.

draft-15:

  • Apply editorial suggestions from CFRG RGLC.

draft-14:

  • Correct current state of formal analysis for the VOPRF protocol variant.

draft-13:

  • Editorial improvements based on Crypto Panel Review.

draft-12:

  • Small editorial fixes

draft-11:

  • Change Evaluate to BlindEvaluate, and add Evaluate for PRF evaluation

draft-10:

  • Editorial improvements

draft-09:

  • Split syntax for OPRF, VOPRF, and POPRF functionalities.
  • Make Blind function fallible for invalid private and public inputs.
  • Specify key generation.
  • Remove serialization steps from core protocol functions.
  • Refactor protocol presentation for clarity.
  • Simplify security considerations.
  • Update application interface considerations.
  • Update test vectors.

draft-08:

  • Adopt partially-oblivious PRF construction from [TCRSTW21].
  • Update P-384 suite to use SHA-384 instead of SHA-512.
  • Update test vectors.
  • Apply various editorial changes.

draft-07:

  • Bind blinding mechanism to mode (additive for verifiable mode and multiplicative for base mode).
  • Add explicit errors for deserialization.
  • Document explicit errors and API considerations.
  • Adopt SHAKE-256 for decaf448 ciphersuite.
  • Normalize HashToScalar functionality for all ciphersuites.
  • Refactor and generalize DLEQ proof functionality and domain separation tags for use in other protocols.
  • Update test vectors.
  • Apply various editorial changes.

draft-06:

  • Specify of group element and scalar serialization.
  • Remove info parameter from the protocol API and update domain separation guidance.
  • Fold Unblind function into Finalize.
  • Optimize ComputeComposites for servers (using knowledge of the private key).
  • Specify deterministic key generation method.
  • Update test vectors.
  • Apply various editorial changes.

draft-05:

  • Move to ristretto255 and decaf448 ciphersuites.
  • Clean up ciphersuite definitions.
  • Pin domain separation tag construction to draft version.
  • Move key generation outside of context construction functions.
  • Editorial changes.

draft-04:

  • Introduce Client and Server contexts for controlling verifiability and required functionality.
  • Condense API.
  • Remove batching from standard functionality (included as an extension)
  • Add Curve25519 and P-256 ciphersuites for applications that prevent strong-DH oracle attacks.
  • Provide explicit prime-order group API and instantiation advice for each ciphersuite.
  • Proof-of-concept implementation in sage.
  • Remove privacy considerations advice as this depends on applications.

draft-03:

  • Certify public key during VerifiableFinalize.
  • Remove protocol integration advice.
  • Add text discussing how to perform domain separation.
  • Drop OPRF_/VOPRF_ prefix from algorithm names.
  • Make prime-order group assumption explicit.
  • Changes to algorithms accepting batched inputs.
  • Changes to construction of batched DLEQ proofs.
  • Updated ciphersuites to be consistent with hash-to-curve and added OPRF specific ciphersuites.

draft-02:

  • Added section discussing cryptographic security and static DH oracles.
  • Updated batched proof algorithms.

draft-01:

  • Updated ciphersuites to be in line with https://tools.ietf.org/html/draft-irtf-cfrg-hash-to-curve-04.
  • Made some necessary modular reductions more explicit.

1.2. Requirements

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

1.3. Notation and Terminology

The following functions and notation are used throughout the document.

  • For any object x, we write len(x) to denote its length in bytes.
  • For two byte arrays x and y, write x || y to denote their concatenation.
  • I2OSP(x, xLen): Converts a non-negative integer x into a byte array of specified length xLen as described in [RFC8017]. Note that this function returns a byte array in big-endian byte order.
  • The notation T U[N] refers to an array called U containing N items of type T. The type opaque means one single byte of uninterpreted data. Items of the array are zero-indexed and referred as U[j] such that 0 <= j < N.

All algorithms and procedures described in this document are laid out in a Python-like pseudocode. Each function takes a set of inputs and parameters and produces a set of output values. Parameters become constant values once the protocol variant and the ciphersuite are fixed.

The PrivateInput data type refers to inputs that are known only to the client in the protocol, whereas the PublicInput data type refers to inputs that are known to both client and server in the protocol. Both PrivateInput and PublicInput are opaque byte strings of arbitrary length no larger than 216 - 1 bytes. This length restriction exists because PublicInput and PrivateInput values are length-prefixed with two bytes before use throughout the protocol.

String values such as "DeriveKeyPair", "Seed-", and "Finalize" are ASCII string literals.

The following terms are used throughout this document.

  • PRF: Pseudorandom Function.
  • OPRF: Oblivious Pseudorandom Function.
  • VOPRF: Verifiable Oblivious Pseudorandom Function.
  • POPRF: Partially Oblivious Pseudorandom Function.
  • Client: Protocol initiator. Learns pseudorandom function evaluation as the output of the protocol.
  • Server: Computes the pseudorandom function using a private key. Learns nothing about the client's input or output.

2. Preliminaries

The protocols in this document have two primary dependencies:

Section 4 specifies ciphersuites as combinations of Group and Hash.

2.1. Prime-Order Group

In this document, we assume the construction of an additive, prime-order group Group for performing all mathematical operations. In prime-order groups, any element (other than the identity) can generate the other elements of the group. Usually, one element is fixed and defined as the group generator. Such groups are uniquely determined by the choice of the prime p that defines the order of the group. (There may, however, exist different representations of the group for a single p. Section 4 lists specific groups which indicate both order and representation.)

The fundamental group operation is addition + with identity element I. For any elements A and B of the group, A + B = B + A is also a member of the group. Also, for any A in the group, there exists an element -A such that A + (-A) = (-A) + A = I. Scalar multiplication by r is equivalent to the repeated application of the group operation on an element A with itself r-1 times, this is denoted as r*A = A + ... + A. For any element A, p*A=I. The case when the scalar multiplication is performed on the group generator is denoted as ScalarMultGen(r). Given two elements A and B, the discrete logarithm problem is to find an integer k such that B = k*A. Thus, k is the discrete logarithm of B with respect to the base A. The set of scalars corresponds to GF(p), a prime field of order p, and are represented as the set of integers defined by {0, 1, ..., p-1}. This document uses types Element and Scalar to denote elements of the group and its set of scalars, respectively.

We now detail a number of member functions that can be invoked on a prime-order group.

  • Order(): Outputs the order of the group (i.e. p).
  • Identity(): Outputs the identity element of the group (i.e. I).
  • Generator(): Outputs the generator element of the group.
  • HashToGroup(x): Deterministically maps an array of bytes x to an element of Group. The map must ensure that, for any adversary receiving R = HashToGroup(x), it is computationally difficult to reverse the mapping. This function is optionally parameterized by a domain separation tag (DST); see Section 4. Security properties of this function are described in [I-D.irtf-cfrg-hash-to-curve].
  • HashToScalar(x): Deterministically maps an array of bytes x to an element in GF(p). This function is optionally parameterized by a DST; see Section 4. Security properties of this function are described in [I-D.irtf-cfrg-hash-to-curve], Section 10.5.
  • RandomScalar(): Chooses at random a non-zero element in GF(p).
  • ScalarInverse(s): Returns the inverse of input Scalar s on GF(p).
  • SerializeElement(A): Maps an Element A to a canonical byte array buf of fixed length Ne.
  • DeserializeElement(buf): Attempts to map a byte array buf to an Element A, and fails if the input is not the valid canonical byte representation of an element of the group. This function can raise a DeserializeError if deserialization fails or A is the identity element of the group; see Section 4 for group-specific input validation steps.
  • SerializeScalar(s): Maps a Scalar s to a canonical byte array buf of fixed length Ns.
  • DeserializeScalar(buf): Attempts to map a byte array buf to a Scalar s. This function can raise a DeserializeError if deserialization fails; see Section 4 for group-specific input validation steps.

Section 4 contains details for the implementation of this interface for different prime-order groups instantiated over elliptic curves. In particular, for some choices of elliptic curves, e.g., those detailed in [RFC7748], which require accounting for cofactors, Section 4 describes required steps necessary to ensure the resulting group is of prime order.

2.2. Discrete Logarithm Equivalence Proofs

A proof of knowledge allows a prover to convince a verifier that some statement is true. If the prover can generate a proof without interaction with the verifier, the proof is noninteractive. If the verifier learns nothing other than whether the statement claimed by the prover is true or false, the proof is zero-knowledge.

This section describes a noninteractive zero-knowledge proof for discrete logarithm equivalence (DLEQ), which is used in the construction of VOPRF and POPRF. A DLEQ proof demonstrates that two pairs of group elements have the same discrete logarithm without revealing the discrete logarithm.

The DLEQ proof resembles the Chaum-Pedersen [ChaumPedersen] proof, which is shown to be zero-knowledge by Jarecki, et al. [JKK14] and is noninteractive after applying the Fiat-Shamir transform [FS00]. Furthermore, Davidson, et al. [DGSTV18] showed a proof system for batching DLEQ proofs that has constant-size proofs with respect to the number of inputs. The specific DLEQ proof system presented below follows this latter construction with two modifications: (1) the transcript used to generate the seed includes more context information, and (2) the individual challenges for each element in the proof is derived from a seed-prefixed hash-to-scalar invocation rather than being sampled from a seeded PRNG. The description is split into two sub-sections: one for generating the proof, which is done by servers in the verifiable protocols, and another for verifying the proof, which is done by clients in the protocol.

2.2.1. Proof Generation

Generating a proof is done with the GenerateProof function, defined below. Given elements A and B, two non-empty lists of elements C and D of length m, and a scalar k; this function produces a proof that k*A == B and k*C[i] == D[i] for each i in [0, ..., m - 1]. The output is a value of type Proof, which is a tuple of two Scalar values. We use the notation proof[0] and proof[1] to denote the first and second elements in this tuple, respectively.

GenerateProof accepts lists of inputs to amortize the cost of proof generation. Applications can take advantage of this functionality to produce a single, constant-sized proof for m DLEQ inputs, rather than m proofs for m DLEQ inputs.

Input:

  Scalar k
  Element A
  Element B
  Element C[m]
  Element D[m]

Output:

  Proof proof

Parameters:

  Group G

def GenerateProof(k, A, B, C, D)
  (M, Z) = ComputeCompositesFast(k, B, C, D)

  r = G.RandomScalar()
  t2 = r * A
  t3 = r * M

  Bm = G.SerializeElement(B)
  a0 = G.SerializeElement(M)
  a1 = G.SerializeElement(Z)
  a2 = G.SerializeElement(t2)
  a3 = G.SerializeElement(t3)

  challengeTranscript =
    I2OSP(len(Bm), 2) || Bm ||
    I2OSP(len(a0), 2) || a0 ||
    I2OSP(len(a1), 2) || a1 ||
    I2OSP(len(a2), 2) || a2 ||
    I2OSP(len(a3), 2) || a3 ||
    "Challenge"

  c = G.HashToScalar(challengeTranscript)
  s = r - c * k

  return [c, s]

The helper function ComputeCompositesFast is as defined below, and is an optimization of the ComputeComposites function for servers since they have knowledge of the private key.

Input:

  Scalar k
  Element B
  Element C[m]
  Element D[m]

Output:

  Element M
  Element Z

Parameters:

  Group G
  PublicInput contextString

def ComputeCompositesFast(k, B, C, D):
  Bm = G.SerializeElement(B)
  seedDST = "Seed-" || contextString
  seedTranscript =
    I2OSP(len(Bm), 2) || Bm ||
    I2OSP(len(seedDST), 2) || seedDST
  seed = Hash(seedTranscript)

  M = G.Identity()
  for i in range(m):
    Ci = G.SerializeElement(C[i])
    Di = G.SerializeElement(D[i])
    compositeTranscript =
      I2OSP(len(seed), 2) || seed || I2OSP(i, 2) ||
      I2OSP(len(Ci), 2) || Ci ||
      I2OSP(len(Di), 2) || Di ||
      "Composite"

    di = G.HashToScalar(compositeTranscript)
    M = di * C[i] + M

  Z = k * M

  return (M, Z)

When used in the protocol described in Section 3, the parameter contextString is as defined in Section 3.2.

2.2.2. Proof Verification

Verifying a proof is done with the VerifyProof function, defined below. This function takes elements A and B, two non-empty lists of elements C and D of length m, and a Proof value output from GenerateProof. It outputs a single boolean value indicating whether or not the proof is valid for the given DLEQ inputs. Note this function can verify proofs on lists of inputs whenever the proof was generated as a batched DLEQ proof with the same inputs.

Input:

  Element A
  Element B
  Element C[m]
  Element D[m]
  Proof proof

Output:

  boolean verified

Parameters:

  Group G

def VerifyProof(A, B, C, D, proof):
  (M, Z) = ComputeComposites(B, C, D)
  c = proof[0]
  s = proof[1]

  t2 = ((s * A) + (c * B))
  t3 = ((s * M) + (c * Z))

  Bm = G.SerializeElement(B)
  a0 = G.SerializeElement(M)
  a1 = G.SerializeElement(Z)
  a2 = G.SerializeElement(t2)
  a3 = G.SerializeElement(t3)

  challengeTranscript =
    I2OSP(len(Bm), 2) || Bm ||
    I2OSP(len(a0), 2) || a0 ||
    I2OSP(len(a1), 2) || a1 ||
    I2OSP(len(a2), 2) || a2 ||
    I2OSP(len(a3), 2) || a3 ||
    "Challenge"

  expectedC = G.HashToScalar(challengeTranscript)
  verified = (expectedC == c)

  return verified

The definition of ComputeComposites is given below.

Input:

  Element B
  Element C[m]
  Element D[m]

Output:

  Element M
  Element Z

Parameters:

  Group G
  PublicInput contextString

def ComputeComposites(B, C, D):
  Bm = G.SerializeElement(B)
  seedDST = "Seed-" || contextString
  seedTranscript =
    I2OSP(len(Bm), 2) || Bm ||
    I2OSP(len(seedDST), 2) || seedDST
  seed = Hash(seedTranscript)

  M = G.Identity()
  Z = G.Identity()
  for i in range(m):
    Ci = G.SerializeElement(C[i])
    Di = G.SerializeElement(D[i])
    compositeTranscript =
      I2OSP(len(seed), 2) || seed || I2OSP(i, 2) ||
      I2OSP(len(Ci), 2) || Ci ||
      I2OSP(len(Di), 2) || Di ||
      "Composite"

    di = G.HashToScalar(compositeTranscript)
    M = di * C[i] + M
    Z = di * D[i] + Z

  return (M, Z)

When used in the protocol described in Section 3, the parameter contextString is as defined in Section 3.2.

3. Protocol

In this section, we define and describe three protocol variants referred to as the OPRF, VOPRF, and POPRF modes. Each of these variants involve two messages between client and server but differ slightly in terms of the security properties; see Section 7.1 for more information. A high level description of the functionality of each mode follows.

In the OPRF mode, a client and server interact to compute output = F(skS, input), where input is the client's private input, skS is the server's private key, and output is the OPRF output. After the execution of the protocol, the client learns output and the server learns nothing. This interaction is shown below.

    Client(input)                                        Server(skS)
  -------------------------------------------------------------------
  blind, blindedElement = Blind(input)

                             blindedElement
                               ---------->

                evaluatedElement = BlindEvaluate(skS, blindedElement)

                             evaluatedElement
                               <----------

  output = Finalize(input, blind, evaluatedElement)
Figure 1: OPRF protocol overview

In the VOPRF mode, the client additionally receives proof that the server used skS in computing the function. To achieve verifiability, as in [JKK14], the server provides a zero-knowledge proof that the key provided as input by the server in the BlindEvaluate function is the same key as it used to produce the server's public key, pkS, which the client receives as input to the protocol. This proof does not reveal the server's private key to the client. This interaction is shown below.

    Client(input, pkS)       <---- pkS ------        Server(skS, pkS)
  -------------------------------------------------------------------
  blind, blindedElement = Blind(input)

                             blindedElement
                               ---------->

              evaluatedElement, proof = BlindEvaluate(skS, pkS,
                                                      blindedElement)

                         evaluatedElement, proof
                               <----------

  output = Finalize(input, blind, evaluatedElement,
                    blindedElement, pkS, proof)
Figure 2: VOPRF protocol overview with additional proof

The POPRF mode extends the VOPRF mode such that the client and server can additionally provide a public input info that is used in computing the pseudorandom function. That is, the client and server interact to compute output = F(skS, input, info) as is shown below.

    Client(input, pkS, info) <---- pkS ------  Server(skS, pkS, info)
  -------------------------------------------------------------------
  blind, blindedElement, tweakedKey = Blind(input, info, pkS)

                             blindedElement
                               ---------->

         evaluatedElement, proof = BlindEvaluate(skS, blindedElement,
                                                 info)

                         evaluatedElement, proof
                               <----------

  output = Finalize(input, blind, evaluatedElement,
                    blindedElement, proof, info, tweakedKey)
Figure 3: POPRF protocol overview with additional public input

Each protocol consists of an offline setup phase and an online phase, described in Section 3.2 and Section 3.3, respectively. Configuration details for the offline phase are described in Section 3.1.

3.1. Configuration

Each of the three protocol variants are identified with a one-byte value (in hexadecimal):

Table 1: Identifiers for protocol variants.
Mode Value
modeOPRF 0x00
modeVOPRF 0x01
modePOPRF 0x02

Additionally, each protocol variant is instantiated with a ciphersuite, or suite. Each ciphersuite is identified with an ASCII string identifier, referred to as identifier; see Section 4 for the set of initial ciphersuite values.

The mode and ciphersuite identifier values are combined to create a "context string" used throughout the protocol with the following function:

def CreateContextString(mode, identifier):
  return "OPRFV1-" || I2OSP(mode, 1) || "-" || identifier

3.2. Key Generation and Context Setup

In the offline setup phase, the server generates a fresh, random key pair (skS, pkS). There are two ways to generate this key pair. The first of which is using the GenerateKeyPair function described below.

Input: None

Output:

  Scalar skS
  Element pkS

Parameters:

  Group G

def GenerateKeyPair():
  skS = G.RandomScalar()
  pkS = G.ScalarMultGen(skS)
  return skS, pkS

The second way to generate the key pair is via the deterministic key generation function DeriveKeyPair described in Section 3.2.1. Applications and implementations can use either method in practice.

Also during the offline setup phase, both the client and server create a context used for executing the online phase of the protocol after agreeing on a mode and ciphersuite identifier. The context, such as OPRFServerContext, is an implementation-specific data structure that stores a context string and the relevant key material for each party.

The OPRF variant server and client contexts are created as follows:

def SetupOPRFServer(identifier, skS):
  contextString = CreateContextString(modeOPRF, identifier)
  return OPRFServerContext(contextString, skS)

def SetupOPRFClient(identifier):
  contextString = CreateContextString(modeOPRF, identifier)
  return OPRFClientContext(contextString)

The VOPRF variant server and client contexts are created as follows:

def SetupVOPRFServer(identifier, skS):
  contextString = CreateContextString(modeVOPRF, identifier)
  return VOPRFServerContext(contextString, skS)

def SetupVOPRFClient(identifier, pkS):
  contextString = CreateContextString(modeVOPRF, identifier)
  return VOPRFClientContext(contextString, pkS)

The POPRF variant server and client contexts are created as follows:

def SetupPOPRFServer(identifier, skS):
  contextString = CreateContextString(modePOPRF, identifier)
  return POPRFServerContext(contextString, skS)

def SetupPOPRFClient(identifier, pkS):
  contextString = CreateContextString(modePOPRF, identifier)
  return POPRFClientContext(contextString, pkS)

3.2.1. Deterministic Key Generation

This section describes a deterministic key generation function, DeriveKeyPair. It accepts a seed of Ns bytes generated from a cryptographically secure random number generator and an optional (possibly empty) info string. The constant Ns corresponds to the size in bytes of a serialized Scalar and is defined in Section 2.1. Note that by design knowledge of seed and info is necessary to compute this function, which means that the secrecy of the output private key (skS) depends on the secrecy of seed (since the info string is public).

Input:

  opaque seed[Ns]
  PublicInput info

Output:

  Scalar skS
  Element pkS

Parameters:

  Group G
  PublicInput contextString

Errors: DeriveKeyPairError

def DeriveKeyPair(seed, info):
  deriveInput = seed || I2OSP(len(info), 2) || info
  counter = 0
  skS = 0
  while skS == 0:
    if counter > 255:
      raise DeriveKeyPairError
    skS = G.HashToScalar(deriveInput || I2OSP(counter, 1),
                          DST = "DeriveKeyPair" || contextString)
    counter = counter + 1
  pkS = G.ScalarMultGen(skS)
  return skS, pkS

3.3. Online Protocol

In the online phase, the client and server engage in a two message protocol to compute the protocol output. This section describes the protocol details for each protocol variant. Throughout each description the following parameters are assumed to exist:

  • G, a prime-order Group implementing the API described in Section 2.1.
  • contextString, a PublicInput domain separation tag constructed during context setup as created in Section 3.1.
  • skS and pkS, a Scalar and Element representing the private and public keys configured for client and server in Section 3.2.

Applications serialize protocol messages between client and server for transmission. Elements and scalars are serialized to byte arrays, and values of type Proof are serialized as the concatenation of two serialized scalars. Deserializing these values can fail, in which case the application MUST abort the protocol raising a DeserializeError failure.

Applications MUST check that input Element values received over the wire are not the group identity element. This check is handled after deserializing Element values; see Section 4 for more information and requirements on input validation for each ciphersuite.

3.3.1. OPRF Protocol

The OPRF protocol begins with the client blinding its input, as described by the Blind function below. Note that this function can fail with an InvalidInputError error for certain inputs that map to the group identity element. Dealing with this failure is an application-specific decision; see Section 5.3.

Input:

  PrivateInput input

Output:

  Scalar blind
  Element blindedElement

Parameters:

  Group G

Errors: InvalidInputError

def Blind(input):
  blind = G.RandomScalar()
  inputElement = G.HashToGroup(input)
  if inputElement == G.Identity():
    raise InvalidInputError
  blindedElement = blind * inputElement

  return blind, blindedElement

Clients store blind locally, and send blindedElement to the server for evaluation. Upon receipt, servers process blindedElement using the BlindEvaluate function described below.

Input:

  Scalar skS
  Element blindedElement

Output:

  Element evaluatedElement

def BlindEvaluate(skS, blindedElement):
  evaluatedElement = skS * blindedElement
  return evaluatedElement

Servers send the output evaluatedElement to clients for processing. Recall that servers may process multiple client inputs by applying the BlindEvaluate function to each blindedElement received, and returning an array with the corresponding evaluatedElement values.

Upon receipt of evaluatedElement, clients process it to complete the OPRF evaluation with the Finalize function described below.

Input:

  PrivateInput input
  Scalar blind
  Element evaluatedElement

Output:

  opaque output[Nh]

Parameters:

  Group G

def Finalize(input, blind, evaluatedElement):
  N = G.ScalarInverse(blind) * evaluatedElement
  unblindedElement = G.SerializeElement(N)

  hashInput = I2OSP(len(input), 2) || input ||
              I2OSP(len(unblindedElement), 2) || unblindedElement ||
              "Finalize"
  return Hash(hashInput)

An entity which knows both the private key and the input can compute the PRF result using the following Evaluate function.

Input:

  Scalar skS
  PrivateInput input

Output:

  opaque output[Nh]

Parameters:

  Group G

Errors: InvalidInputError

def Evaluate(skS, input):
  inputElement = G.HashToGroup(input)
  if inputElement == G.Identity():
    raise InvalidInputError
  evaluatedElement = skS * inputElement
  issuedElement = G.SerializeElement(evaluatedElement)

  hashInput = I2OSP(len(input), 2) || input ||
              I2OSP(len(issuedElement), 2) || issuedElement ||
              "Finalize"
  return Hash(hashInput)

3.3.2. VOPRF Protocol

The VOPRF protocol begins with the client blinding its input, using the same Blind function as in Section 3.3.1. Clients store the output blind locally and send blindedElement to the server for evaluation. Upon receipt, servers process blindedElement to compute an evaluated element and DLEQ proof using the following BlindEvaluate function.

Input:

  Scalar skS
  Element pkS
  Element blindedElement

Output:

  Element evaluatedElement
  Proof proof

Parameters:

  Group G

def BlindEvaluate(skS, pkS, blindedElement):
  evaluatedElement = skS * blindedElement
  blindedElements = [blindedElement]     // list of length 1
  evaluatedElements = [evaluatedElement] // list of length 1
  proof = GenerateProof(skS, G.Generator(), pkS,
                        blindedElements, evaluatedElements)
  return evaluatedElement, proof

In the description above, inputs to GenerateProof are one-item lists. Using larger lists allows servers to batch the evaluation of multiple elements while producing a single batched DLEQ proof for them.

The server sends both evaluatedElement and proof back to the client. Upon receipt, the client processes both values to complete the VOPRF computation using the Finalize function below.

Input:

  PrivateInput input
  Scalar blind
  Element evaluatedElement
  Element blindedElement
  Element pkS
  Proof proof

Output:

  opaque output[Nh]

Parameters:

  Group G

Errors: VerifyError

def Finalize(input, blind, evaluatedElement,
             blindedElement, pkS, proof):
  blindedElements = [blindedElement]     // list of length 1
  evaluatedElements = [evaluatedElement] // list of length 1
  if VerifyProof(G.Generator(), pkS, blindedElements,
                 evaluatedElements, proof) == false:
    raise VerifyError

  N = G.ScalarInverse(blind) * evaluatedElement
  unblindedElement = G.SerializeElement(N)

  hashInput = I2OSP(len(input), 2) || input ||
              I2OSP(len(unblindedElement), 2) || unblindedElement ||
              "Finalize"
  return Hash(hashInput)

As in BlindEvaluate, inputs to VerifyProof are one-item lists. Clients can verify multiple inputs at once whenever the server produced a batched DLEQ proof for them.

Finally, an entity which knows both the private key and the input can compute the PRF result using the Evaluate function described in Section 3.3.1.

3.3.3. POPRF Protocol

The POPRF protocol begins with the client blinding its input, using the following modified Blind function. In this step, the client also binds a public info value, which produces an additional tweakedKey to be used later in the protocol. Note that this function can fail with an InvalidInputError error for certain private inputs that map to the group identity element, as well as certain public inputs that, if not detected at this point, will cause server evaluation to fail. Dealing with either failure is an application-specific decision; see Section 5.3.

Input:

  PrivateInput input
  PublicInput info
  Element pkS

Output:

  Scalar blind
  Element blindedElement
  Element tweakedKey

Parameters:

  Group G

Errors: InvalidInputError

def Blind(input, info, pkS):
  framedInfo = "Info" || I2OSP(len(info), 2) || info
  m = G.HashToScalar(framedInfo)
  T = G.ScalarMultGen(m)
  tweakedKey = T + pkS
  if tweakedKey == G.Identity():
    raise InvalidInputError

  blind = G.RandomScalar()
  inputElement = G.HashToGroup(input)
  if inputElement == G.Identity():
    raise InvalidInputError

  blindedElement = blind * inputElement

  return blind, blindedElement, tweakedKey

Clients store the outputs blind and tweakedKey locally and send blindedElement to the server for evaluation. Upon receipt, servers process blindedElement to compute an evaluated element and DLEQ proof using the following BlindEvaluate function.

Input:

  Scalar skS
  Element blindedElement
  PublicInput info

Output:

  Element evaluatedElement
  Proof proof

Parameters:

  Group G

Errors: InverseError

def BlindEvaluate(skS, blindedElement, info):
  framedInfo = "Info" || I2OSP(len(info), 2) || info
  m = G.HashToScalar(framedInfo)
  t = skS + m
  if t == 0:
    raise InverseError

  evaluatedElement = G.ScalarInverse(t) * blindedElement

  tweakedKey = G.ScalarMultGen(t)
  evaluatedElements = [evaluatedElement] // list of length 1
  blindedElements = [blindedElement]     // list of length 1
  proof = GenerateProof(t, G.Generator(), tweakedKey,
                        evaluatedElements, blindedElements)

  return evaluatedElement, proof

In the description above, inputs to GenerateProof are one-item lists. Using larger lists allows servers to batch the evaluation of multiple elements while producing a single batched DLEQ proof for them.

BlindEvaluate triggers InverseError when the function is about to calculate the inverse of a zero scalar, which does not exist and therefore yields a failure in the protocol. This only occurs for info values that map to the private key of the server. Thus, clients that cause this error should be assumed to know the server private key. Hence, this error can be a signal for the server to replace its private key.

The server sends both evaluatedElement and proof back to the client. Upon receipt, the client processes both values to complete the POPRF computation using the Finalize function below.

Input:

  PrivateInput input
  Scalar blind
  Element evaluatedElement
  Element blindedElement
  Proof proof
  PublicInput info
  Element tweakedKey

Output:

  opaque output[Nh]

Parameters:

  Group G

Errors: VerifyError

def Finalize(input, blind, evaluatedElement, blindedElement,
             proof, info, tweakedKey):
  evaluatedElements = [evaluatedElement] // list of length 1
  blindedElements = [blindedElement]     // list of length 1
  if VerifyProof(G.Generator(), tweakedKey, evaluatedElements,
                 blindedElements, proof) == false:
    raise VerifyError

  N = G.ScalarInverse(blind) * evaluatedElement
  unblindedElement = G.SerializeElement(N)

  hashInput = I2OSP(len(input), 2) || input ||
              I2OSP(len(info), 2) || info ||
              I2OSP(len(unblindedElement), 2) || unblindedElement ||
              "Finalize"
  return Hash(hashInput)

As in BlindEvaluate, inputs to VerifyProof are one-item lists. Clients can verify multiple inputs at once whenever the server produced a batched DLEQ proof for them.

Finally, an entity which knows both the private key and the input can compute the PRF result using the Evaluate function described below.

Input:

  Scalar skS
  PrivateInput input
  PublicInput info

Output:

  opaque output[Nh]

Parameters:

  Group G

Errors: InvalidInputError, InverseError

def Evaluate(skS, input, info):
  inputElement = G.HashToGroup(input)
  if inputElement == G.Identity():
    raise InvalidInputError

  framedInfo = "Info" || I2OSP(len(info), 2) || info
  m = G.HashToScalar(framedInfo)
  t = skS + m
  if t == 0:
    raise InverseError
  evaluatedElement = G.ScalarInverse(t) * inputElement
  issuedElement = G.SerializeElement(evaluatedElement)

  hashInput = I2OSP(len(input), 2) || input ||
              I2OSP(len(info), 2) || info ||
              I2OSP(len(issuedElement), 2) || issuedElement ||
              "Finalize"
  return Hash(hashInput)

4. Ciphersuites

A ciphersuite (also referred to as 'suite' in this document) for the protocol wraps the functionality required for the protocol to take place. The ciphersuite should be available to both the client and server, and agreement on the specific instantiation is assumed throughout.

A ciphersuite contains instantiations of the following functionalities:

This section includes an initial set of ciphersuites with supported groups and hash functions. It also includes implementation details for each ciphersuite, focusing on input validation. Future documents can specify additional ciphersuites as needed provided they meet the requirements in Section 4.6.

For each ciphersuite, contextString is that which is computed in the Setup functions. Applications should take caution in using ciphersuites targeting P-256 and ristretto255. See Section 7.2 for related discussion.

4.1. OPRF(ristretto255, SHA-512)

This ciphersuite uses ristretto255 [RISTRETTO] for the Group and SHA-512 for the Hash function. The value of the ciphersuite identifier is "ristretto255-SHA512".

  • Group: ristretto255 [RISTRETTO]

    • Order(): Return 2^252 + 27742317777372353535851937790883648493 (see [RISTRETTO])
    • Identity(): As defined in [RISTRETTO].
    • Generator(): As defined in [RISTRETTO].
    • HashToGroup(): Use hash_to_ristretto255 [I-D.irtf-cfrg-hash-to-curve] with DST = "HashToGroup-" || contextString, and expand_message = expand_message_xmd using SHA-512.
    • HashToScalar(): Compute uniform_bytes using expand_message = expand_message_xmd, DST = "HashToScalar-" || contextString, and output length 64, interpret uniform_bytes as a 512-bit integer in little-endian order, and reduce the integer modulo Group.Order().
    • ScalarInverse(s): Returns the multiplicative inverse of input Scalar s mod Group.Order().
    • RandomScalar(): Implemented by returning a uniformly random Scalar in the range [0, G.Order() - 1]. Refer to Section 4.7 for implementation guidance.
    • SerializeElement(A): Implemented using the 'Encode' function from Section 4.3.2 of [RISTRETTO]; Ne = 32.
    • DeserializeElement(buf): Implemented using the 'Decode' function from Section 4.3.1 of [RISTRETTO]. Additionally, this function validates that the resulting element is not the group identity element. If these checks fail, deserialization returns an InputValidationError error.
    • SerializeScalar(s): Implemented by outputting the little-endian 32-byte encoding of the Scalar value with the top three bits set to zero; Ns = 32.
    • DeserializeScalar(buf): Implemented by attempting to deserialize a Scalar from a little-endian 32-byte string. This function can fail if the input does not represent a Scalar in the range [0, G.Order() - 1]. Note that this means the top three bits of the input MUST be zero.
  • Hash: SHA-512; Nh = 64.

4.2. OPRF(decaf448, SHAKE-256)

This ciphersuite uses decaf448 [RISTRETTO] for the Group and SHAKE-256 for the Hash function. The value of the ciphersuite identifier is "decaf448-SHAKE256".

  • Group: decaf448 [RISTRETTO]

    • Order(): Return 2^446 - 13818066809895115352007386748515426880336692474882178609894547503885
    • Identity(): As defined in [RISTRETTO].
    • Generator(): As defined in [RISTRETTO].
    • RandomScalar(): Implemented by returning a uniformly random Scalar in the range [0, G.Order() - 1]. Refer to Section 4.7 for implementation guidance.
    • HashToGroup(): Use hash_to_decaf448 [I-D.irtf-cfrg-hash-to-curve] with DST = "HashToGroup-" || contextString, and expand_message = expand_message_xof using SHAKE-256.
    • HashToScalar(): Compute uniform_bytes using expand_message = expand_message_xof, DST = "HashToScalar-" || contextString, and output length 64, interpret uniform_bytes as a 512-bit integer in little-endian order, and reduce the integer modulo Group.Order().
    • ScalarInverse(s): Returns the multiplicative inverse of input Scalar s mod Group.Order().
    • SerializeElement(A): Implemented using the 'Encode' function from Section 5.3.2 of [RISTRETTO]; Ne = 56.
    • DeserializeElement(buf): Implemented using the 'Decode' function from Section 5.3.1 of [RISTRETTO]. Additionally, this function validates that the resulting element is not the group identity element. If these checks fail, deserialization returns an InputValidationError error.
    • SerializeScalar(s): Implemented by outputting the little-endian 56-byte encoding of the Scalar value; Ns = 56.
    • DeserializeScalar(buf): Implemented by attempting to deserialize a Scalar from a little-endian 56-byte string. This function can fail if the input does not represent a Scalar in the range [0, G.Order() - 1].
  • Hash: SHAKE-256; Nh = 64.

4.3. OPRF(P-256, SHA-256)

This ciphersuite uses P-256 [NISTCurves] for the Group and SHA-256 for the Hash function. The value of the ciphersuite identifier is "P256-SHA256".

  • Group: P-256 (secp256r1) [NISTCurves]

    • Order(): Return 0xffffffff00000000ffffffffffffffffbce6faada7179e84f3b9cac2fc632551.
    • Identity(): As defined in [NISTCurves].
    • Generator(): As defined in [NISTCurves].
    • RandomScalar(): Implemented by returning a uniformly random Scalar in the range [0, G.Order() - 1]. Refer to Section 4.7 for implementation guidance.
    • HashToGroup(): Use hash_to_curve with suite P256_XMD:SHA-256_SSWU_RO_ [I-D.irtf-cfrg-hash-to-curve] and DST = "HashToGroup-" || contextString.
    • HashToScalar(): Use hash_to_field from [I-D.irtf-cfrg-hash-to-curve] using L = 48, expand_message_xmd with SHA-256, DST = "HashToScalar-" || contextString, and prime modulus equal to Group.Order().
    • ScalarInverse(s): Returns the multiplicative inverse of input Scalar s mod Group.Order().
    • SerializeElement(A): Implemented using the compressed Elliptic-Curve-Point-to-Octet-String method according to [SEC1]; Ne = 33.
    • DeserializeElement(buf): Implemented by attempting to deserialize a 33 byte input string to a public key using the compressed Octet-String-to-Elliptic-Curve-Point method according to [SEC1], and then performs partial public-key validation as defined in section 5.6.2.3.4 of [KEYAGREEMENT]. This includes checking that the coordinates of the resulting point are in the correct range, that the point is on the curve, and that the point is not the group identity element. If these checks fail, deserialization returns an InputValidationError error.
    • SerializeScalar(s): Implemented using the Field-Element-to-Octet-String conversion according to [SEC1]; Ns = 32.
    • DeserializeScalar(buf): Implemented by attempting to deserialize a Scalar from a 32-byte string using Octet-String-to-Field-Element from [SEC1]. This function can fail if the input does not represent a Scalar in the range [0, G.Order() - 1].
  • Hash: SHA-256; Nh = 32.

4.4. OPRF(P-384, SHA-384)

This ciphersuite uses P-384 [NISTCurves] for the Group and SHA-384 for the Hash function. The value of the ciphersuite identifier is "P384-SHA384".

  • Group: P-384 (secp384r1) [NISTCurves]

    • Order(): Return 0xffffffffffffffffffffffffffffffffffffffffffffffffc7634d81f4372ddf581a0db248b0a77aecec196accc52973.
    • Identity(): As defined in [NISTCurves].
    • Generator(): As defined in [NISTCurves].
    • RandomScalar(): Implemented by returning a uniformly random Scalar in the range [0, G.Order() - 1]. Refer to Section 4.7 for implementation guidance.
    • HashToGroup(): Use hash_to_curve with suite P384_XMD:SHA-384_SSWU_RO_ [I-D.irtf-cfrg-hash-to-curve] and DST = "HashToGroup-" || contextString.
    • HashToScalar(): Use hash_to_field from [I-D.irtf-cfrg-hash-to-curve] using L = 72, expand_message_xmd with SHA-384, DST = "HashToScalar-" || contextString, and prime modulus equal to Group.Order().
    • ScalarInverse(s): Returns the multiplicative inverse of input Scalar s mod Group.Order().
    • SerializeElement(A): Implemented using the compressed Elliptic-Curve-Point-to-Octet-String method according to [SEC1]; Ne = 49.
    • DeserializeElement(buf): Implemented by attempting to deserialize a 49-byte array to a public key using the compressed Octet-String-to-Elliptic-Curve-Point method according to [SEC1], and then performs partial public-key validation as defined in section 5.6.2.3.4 of [KEYAGREEMENT]. This includes checking that the coordinates of the resulting point are in the correct range, that the point is on the curve, and that the point is not the point at infinity. Additionally, this function validates that the resulting element is not the group identity element. If these checks fail, deserialization returns an InputValidationError error.
    • SerializeScalar(s): Implemented using the Field-Element-to-Octet-String conversion according to [SEC1]; Ns = 48.
    • DeserializeScalar(buf): Implemented by attempting to deserialize a Scalar from a 48-byte string using Octet-String-to-Field-Element from [SEC1]. This function can fail if the input does not represent a Scalar in the range [0, G.Order() - 1].
  • Hash: SHA-384; Nh = 48.

4.5. OPRF(P-521, SHA-512)

This ciphersuite uses P-521 [NISTCurves] for the Group and SHA-512 for the Hash function. The value of the ciphersuite identifier is "P521-SHA512".

  • Group: P-521 (secp521r1) [NISTCurves]

    • Order(): Return 0x01fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffa51868783bf2f966b7fcc0148f709a5d03bb5c9b8899c47aebb6fb71e91386409.
    • Identity(): As defined in [NISTCurves].
    • Generator(): As defined in [NISTCurves].
    • RandomScalar(): Implemented by returning a uniformly random Scalar in the range [0, G.Order() - 1]. Refer to Section 4.7 for implementation guidance.
    • HashToGroup(): Use hash_to_curve with suite P521_XMD:SHA-512_SSWU_RO_ [I-D.irtf-cfrg-hash-to-curve] and DST = "HashToGroup-" || contextString.
    • HashToScalar(): Use hash_to_field from [I-D.irtf-cfrg-hash-to-curve] using L = 98, expand_message_xmd with SHA-512, DST = "HashToScalar-" || contextString, and prime modulus equal to Group.Order().
    • ScalarInverse(s): Returns the multiplicative inverse of input Scalar s mod Group.Order().
    • SerializeElement(A): Implemented using the compressed Elliptic-Curve-Point-to-Octet-String method according to [SEC1]; Ne = 67.
    • DeserializeElement(buf): Implemented by attempting to deserialize a 49 byte input string to a public key using the compressed Octet-String-to-Elliptic-Curve-Point method according to [SEC1], and then performs partial public-key validation as defined in section 5.6.2.3.4 of [KEYAGREEMENT]. This includes checking that the coordinates of the resulting point are in the correct range, that the point is on the curve, and that the point is not the point at infinity. Additionally, this function validates that the resulting element is not the group identity element. If these checks fail, deserialization returns an InputValidationError error.
    • SerializeScalar(s): Implemented using the Field-Element-to-Octet-String conversion according to [SEC1]; Ns = 66.
    • DeserializeScalar(buf): Implemented by attempting to deserialize a Scalar from a 66-byte string using Octet-String-to-Field-Element from [SEC1]. This function can fail if the input does not represent a Scalar in the range [0, G.Order() - 1].
  • Hash: SHA-512; Nh = 64.

4.6. Future Ciphersuites

A critical requirement of implementing the prime-order group using elliptic curves is a method to instantiate the function HashToGroup, that maps inputs to group elements. In the elliptic curve setting, this deterministically maps inputs (as byte arrays) to uniformly chosen points on the curve.

In the security proof of the construction Hash is modeled as a random oracle. This implies that any instantiation of HashToGroup must be pre-image and collision resistant. In Section 4 we give instantiations of this functionality based on the functions described in [I-D.irtf-cfrg-hash-to-curve]. Consequently, any OPRF implementation must adhere to the implementation and security considerations discussed in [I-D.irtf-cfrg-hash-to-curve] when instantiating the function.

The DeserializeElement and DeserializeScalar functions instantiated for a particular prime-order group corresponding to a ciphersuite MUST adhere to the description in Section 2.1. Future ciphersuites MUST describe how input validation is done for DeserializeElement and DeserializeScalar.

Additionally, future ciphersuites must take care when choosing the security level of the group. See Section 7.2.3 for additional details.

4.7. Random Scalar Generation

Two popular algorithms for generating a random integer uniformly distributed in the range [0, G.Order() -1] are as follows:

4.7.1. Rejection Sampling

Generate a random byte array with Ns bytes, and attempt to map to a Scalar by calling DeserializeScalar in constant time. If it succeeds, return the result. If it fails, try again with another random byte array, until the procedure succeeds. Failure to implement DeserializeScalar in constant time can leak information about the underlying corresponding Scalar.

As an optimization, if the group order is very close to a power of 2, it is acceptable to omit the rejection test completely. In particular, if the group order is p, and there is an integer b such that |p - 2b| is less than 2(b/2), then RandomScalar can simply return a uniformly random integer of at most b bits.

4.7.2. Random Number Generation Using Extra Random Bits

Generate a random byte array with L = ceil(((3 * ceil(log2(G.Order()))) / 2) / 8) bytes, and interpret it as an integer; reduce the integer modulo G.Order() and return the result. See [I-D.irtf-cfrg-hash-to-curve], Section 5 for the underlying derivation of L.

5. Application Considerations

This section describes considerations for applications, including external interface recommendations, explicit error treatment, and public input representation for the POPRF protocol variant.

5.1. Input Limits

Application inputs, expressed as PrivateInput or PublicInput values, MUST be smaller than 216-1 bytes in length. Applications that require longer inputs can use a cryptographic hash function to map these longer inputs to a fixed-length input that fits within the PublicInput or PrivateInput length bounds. Note that some cryptographic hash functions have input length restrictions themselves, but these limits are often large enough to not be a concern in practice. For example, SHA-256 has an input limit of 2^61 bytes.

5.2. External Interface Recommendations

In Section 3.3, the interface of the protocol functions allows that some inputs (and outputs) to be group elements and scalars. However, implementations can instead operate over group elements and scalars internally, and only expose interfaces that operate with an application-specific format of messages.

5.3. Error Considerations

Some OPRF variants specified in this document have fallible operations. For example, Finalize and BlindEvaluate can fail if any element received from the peer fails input validation. The explicit errors generated throughout this specification, along with the conditions that lead to each error, are as follows:

There are other explicit errors generated in this specification; however, they occur with negligible probability in practice. We note them here for completeness.

In general, the errors in this document are meant as a guide to implementors. They are not an exhaustive list of all the errors an implementation might emit. For example, implementations might run out of memory and return a corresponding error.

5.4. POPRF Public Input

Functionally, the VOPRF and POPRF variants differ in that the POPRF variant admits public input, whereas the VOPRF variant does not. Public input allows clients and servers to cryptographically bind additional data to the POPRF output. A POPRF with fixed public input is functionally equivalent to a VOPRF. However, there are differences in the underlying security assumptions made about each variant; see Section 7.2 for more details.

This public input is known to both parties at the start of the protocol. It is RECOMMENDED that this public input be constructed with some type of higher-level domain separation to avoid cross protocol attacks or related issues. For example, protocols using this construction might ensure that the public input uses a unique, prefix-free encoding. See [I-D.irtf-cfrg-hash-to-curve], Section 10.4 for further discussion on constructing domain separation values.

Implementations of the POPRF may choose to not let applications control info in cases where this value is fixed or otherwise not useful to the application. In this case, the resulting protocol is functionally equivalent to the VOPRF, which does not admit public input.

6. IANA considerations

This document has no IANA actions.

7. Security Considerations

This section discusses the security of the protocols defined in this specification, along with some suggestions and trade-offs that arise from the implementation of the protocol variants in this document. Note that the syntax of the POPRF variant is different from that of the OPRF and VOPRF variants since it admits an additional public input, but the same security considerations apply.

7.1. Security Properties

The security properties of an OPRF protocol with functionality y = F(k, x) include those of a standard PRF. Specifically:

  • Pseudorandomness: For a random sampling of k, F is pseudorandom if the output y = F(k, x) on any input x is indistinguishable from uniformly sampling any element in F's range.

In other words, consider an adversary that picks inputs x from the domain of F and evaluates F on (k, x) (without knowledge of randomly sampled k). Then the output distribution F(k, x) is indistinguishable from the output distribution of a randomly chosen function with the same domain and range.

A consequence of showing that a function is pseudorandom is that it is necessarily non-malleable (i.e. we cannot compute a new evaluation of F from an existing evaluation). A genuinely random function will be non-malleable with high probability, and so a pseudorandom function must be non-malleable to maintain indistinguishability.

  • Unconditional input secrecy: The server does not learn anything about the client input x, even with unbounded computation.

In other words, an attacker with infinite computing power cannot recover any information about the client's private input x from an invocation of the protocol.

Essentially, input secrecy is the property that, even if the server learns the client's private input x at some point in the future, the server cannot link any particular PRF evaluation to x. This property is also known as unlinkability [DGSTV18].

Beyond client input secret, in the OPRF protocol, the server learns nothing about the output y of the function, nor does the client learn anything about the server's private key k.

For the VOPRF and POPRF protocol variants, there is an additional security property:

  • Verifiable: The client must only complete execution of the protocol if it can successfully assert that the output it computes is correct. This is taken with respect to the private key held by the server.

Any VOPRF or POPRF that satisfies the 'verifiable' security property is known as 'verifiable'. In practice, the notion of verifiability requires that the server commits to the key before the actual protocol execution takes place. Then the client verifies that the server has used the key in the protocol using this commitment. In the following, we may also refer to this commitment as a public key.

Finally, the POPRF variant also has the following security property:

  • Partial obliviousness: The client and server must be able to perform the PRF on client's private input and public input. Both client and server know the public input, but similar to the OPRF and VOPRF protocols, the server learns nothing about the client's private input or the output of the function, and the client learns nothing about the server's private key.

This property becomes useful when dealing with key management operations such as the rotation of server's keys. Note that partial obliviousness only applies to the POPRF variant because neither the OPRF nor VOPRF variants accept public input to the protocol.

Since the POPRF variant has a different syntax than the OPRF and VOPRF variants, i.e., y = F(k, x, info), the pseudorandomness property is generalized:

  • Pseudorandomness: For a random sampling of k, F is pseudorandom if the output y = F(k, x, info) on any input pairs (x, info) is indistinguishable from uniformly sampling any element in F's range.

7.2. Security Assumptions

Below, we discuss the cryptographic security of each protocol variant from Section 3, relative to the necessary cryptographic assumptions that need to be made.

7.2.1. OPRF and VOPRF Assumptions

The OPRF and VOPRF protocol variants in this document are based on [JKK14]. In particular, the VOPRF construction is similar to the [JKK14] construction with the following distinguishing properties:

  1. This document does not use session identifiers to differentiate different instances of the protocol; and
  2. This document supports batching so that multiple evaluations can happen at once whilst only constructing one DLEQ proof object. This is enabled using an established batching technique [DGSTV18].

The pseudorandomness and input secrecy (and verifiability) of the OPRF (and VOPRF) protocols in [JKK14] are based on the One-More Gap Computational Diffie Hellman assumption that is computationally difficult to solve in the corresponding prime-order group. In [JKK14], these properties are proven for one instance (i.e., one key) of the VOPRF protocol, and without batching. There is currently no security analysis available for the VOPRF protocol described in this document in a setting with multiple server keys or batching.

7.2.2. POPRF Assumptions

The POPRF construction in this document is based on the construction known as 3HashSDHI given by [TCRSTW21]. The construction is identical to 3HashSDHI, except that this design can optionally perform multiple POPRF evaluations in one batch, whilst only constructing one DLEQ proof object. This is enabled using an established batching technique [DGSTV18].

Pseudorandomness, input secrecy, verifiability, and partial obliviousness of the POPRF variant is based on the assumption that the One-More Gap Strong Diffie-Hellman Inversion (SDHI) assumption from [TCRSTW21] is computationally difficult to solve in the corresponding prime-order group. Tyagi et al. [TCRSTW21] show that both the One-More Gap Computational Diffie Hellman assumption and the One-More Gap SDHI assumption reduce to the q-DL (Discrete Log) assumption in the algebraic group model, for some q number of BlindEvaluate queries. (The One-More Gap Computational Diffie Hellman assumption was the hardness assumption used to evaluate the OPRF and VOPRF designs based on [JKK14], which is a predecessor to the POPRF variant in Section 3.3.3.)

7.2.3. Static Diffie Hellman Attack and Security Limits

A side-effect of the OPRF protocol variants in this document is that they allow instantiation of an oracle for constructing static DH samples; see [BG04] and [Cheon06]. These attacks are meant to recover (bits of) the server private key. Best-known attacks reduce the security of the prime-order group instantiation by log_2(Q)/2 bits, where Q is the number of BlindEvaluate calls made by the attacker.

As a result of this class of attacks, choosing prime-order groups with a 128-bit security level instantiates an OPRF with a reduced security level of 128-(log_2(Q)/2) bits of security. Moreover, such attacks are only possible for those certain applications where the adversary can query the OPRF directly. Applications can mitigate against this problem in a variety of ways, e.g., by rate-limiting client queries to BlindEvaluate or by rotating private keys. In applications where such an oracle is not made available this security loss does not apply.

In most cases, it would require an informed and persistent attacker to launch a highly expensive attack to reduce security to anything much below 100 bits of security. Applications that admit the aforementioned oracle functionality, and that cannot tolerate discrete logarithm security of lower than 128 bits, are RECOMMENDED to choose groups that target a higher security level, such as decaf448 (used by ciphersuite decaf448-SHAKE256), P-384 (used by ciphersuite P384-SHA384), or P-521 (used by ciphersuite P521-SHA512).

7.3. Domain Separation

Applications SHOULD construct input to the protocol to provide domain separation. Any system which has multiple OPRF applications should distinguish client inputs to ensure the OPRF results are separate. Guidance for constructing info can be found in [I-D.irtf-cfrg-hash-to-curve], Section 3.1.

7.4. Timing Leaks

To ensure no information is leaked during protocol execution, all operations that use secret data MUST run in constant time. This includes all prime-order group operations and proof-specific operations that operate on secret data, including GenerateProof and BlindEvaluate.

8. Acknowledgements

This document resulted from the work of the Privacy Pass team [PrivacyPass]. The authors would also like to acknowledge helpful conversations with Hugo Krawczyk. Eli-Shaoul Khedouri provided additional review and comments on key consistency. Daniel Bourdrez, Tatiana Bradley, Sofia Celi, Frank Denis, Julia Hesse, Russ Housley, Kevin Lewi, Christopher Patton, and Bas Westerbaan also provided helpful input and contributions to the document.

9. References

9.1. Normative References

[I-D.irtf-cfrg-hash-to-curve]
Faz-Hernandez, A., Scott, S., Sullivan, N., Wahby, R. S., and C. A. Wood, "Hashing to Elliptic Curves", Work in Progress, Internet-Draft, draft-irtf-cfrg-hash-to-curve-16, , <https://datatracker.ietf.org/doc/html/draft-irtf-cfrg-hash-to-curve-16>.
[KEYAGREEMENT]
Barker, E., Chen, L., Roginsky, A., Vassilev, A., and R. Davis, "Recommendation for pair-wise key-establishment schemes using discrete logarithm cryptography", National Institute of Standards and Technology report, DOI 10.6028/nist.sp.800-56ar3, , <https://doi.org/10.6028/nist.sp.800-56ar3>.
[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/rfc/rfc2119>.
[RFC8017]
Moriarty, K., Ed., Kaliski, B., Jonsson, J., and A. Rusch, "PKCS #1: RSA Cryptography Specifications Version 2.2", RFC 8017, DOI 10.17487/RFC8017, , <https://www.rfc-editor.org/rfc/rfc8017>.
[RFC8174]
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/rfc/rfc8174>.
[RISTRETTO]
de Valence, H., Grigg, J., Hamburg, M., Lovecruft, I., Tankersley, G., and F. Valsorda, "The ristretto255 and decaf448 Groups", Work in Progress, Internet-Draft, draft-irtf-cfrg-ristretto255-decaf448-06, , <https://datatracker.ietf.org/doc/html/draft-irtf-cfrg-ristretto255-decaf448-06>.

9.2. Informative References

[BG04]
Brown, D. and R. Gallant, "The Static Diffie-Hellman Problem", <https://eprint.iacr.org/2004/306>.
[ChaumPedersen]
Chaum, D. and T. Pedersen, "Wallet Databases with Observers", Advances in Cryptology - CRYPTO' 92 pp. 89-105, DOI 10.1007/3-540-48071-4_7, , <https://doi.org/10.1007/3-540-48071-4_7>.
[Cheon06]
Cheon, J., "Security Analysis of the Strong Diffie-Hellman Problem", Advances in Cryptology - EUROCRYPT 2006 pp. 1-11, DOI 10.1007/11761679_1, , <https://doi.org/10.1007/11761679_1>.
[DGSTV18]
Davidson, A., Goldberg, I., Sullivan, N., Tankersley, G., and F. Valsorda, "Privacy Pass: Bypassing Internet Challenges Anonymously", Proceedings on Privacy Enhancing Technologies vol. 2018, no. 3, pp. 164-180, DOI 10.1515/popets-2018-0026, , <https://doi.org/10.1515/popets-2018-0026>.
[FS00]
Fiat, A. and A. Shamir, "How To Prove Yourself: Practical Solutions to Identification and Signature Problems", Advances in Cryptology - CRYPTO' 86 pp. 186-194, DOI 10.1007/3-540-47721-7_12, , <https://doi.org/10.1007/3-540-47721-7_12>.
[JKK14]
Jarecki, S., Kiayias, A., and H. Krawczyk, "Round-Optimal Password-Protected Secret Sharing and T-PAKE in the Password-Only Model", Lecture Notes in Computer Science pp. 233-253, DOI 10.1007/978-3-662-45608-8_13, , <https://doi.org/10.1007/978-3-662-45608-8_13>.
[JKKX16]
Jarecki, S., Kiayias, A., Krawczyk, H., and J. Xu, "Highly-Efficient and Composable Password-Protected Secret Sharing (Or: How to Protect Your Bitcoin Wallet Online)", 2016 IEEE European Symposium on Security and Privacy (EuroS&P), DOI 10.1109/eurosp.2016.30, , <https://doi.org/10.1109/eurosp.2016.30>.
[NISTCurves]
"Digital Signature Standard (DSS)", National Institute of Standards and Technology report, DOI 10.6028/nist.fips.186-4, , <https://doi.org/10.6028/nist.fips.186-4>.
[OPAQUE]
Bourdrez, D., Krawczyk, H., Lewi, K., and C. A. Wood, "The OPAQUE Asymmetric PAKE Protocol", Work in Progress, Internet-Draft, draft-irtf-cfrg-opaque-09, , <https://datatracker.ietf.org/doc/html/draft-irtf-cfrg-opaque-09>.
[PrivacyPass]
"Privacy Pass", <https://github.com/privacypass/team>.
[PRIVACYPASS]
Celi, S., Davidson, A., Faz-Hernandez, A., Valdez, S., and C. A. Wood, "Privacy Pass Issuance Protocol", Work in Progress, Internet-Draft, draft-ietf-privacypass-protocol-08, , <https://datatracker.ietf.org/doc/html/draft-ietf-privacypass-protocol-08>.
[RFC7748]
Langley, A., Hamburg, M., and S. Turner, "Elliptic Curves for Security", RFC 7748, DOI 10.17487/RFC7748, , <https://www.rfc-editor.org/rfc/rfc7748>.
[SEC1]
Standards for Efficient Cryptography Group (SECG), "SEC 1: Elliptic Curve Cryptography", <https://www.secg.org/sec1-v2.pdf>.
[SJKS17]
Shirvanian, M., Jarecki, S., Krawczyk, H., and N. Saxena, "SPHINX: A Password Store that Perfectly Hides Passwords from Itself", In 2017 IEEE 37th International Conference on Distributed Computing Systems (ICDCS), DOI 10.1109/ICDCS.2017.64, , <https://doi.org/10.1109/ICDCS.2017.64>.
[TCRSTW21]
Tyagi, N., Celi, S., Ristenpart, T., Sullivan, N., Tessaro, S., and C. Wood, "A Fast and Simple Partially Oblivious PRF, with Applications", Advances in Cryptology - EUROCRYPT 2022 pp. 674-705, DOI 10.1007/978-3-031-07085-3_23, , <https://doi.org/10.1007/978-3-031-07085-3_23>.

Appendix A. Test Vectors

This section includes test vectors for the protocol variants specified in this document. For each ciphersuite specified in Section 4, there is a set of test vectors for the protocol when run the OPRF, VOPRF, and POPRF modes. Each test vector lists the batch size for the evaluation. Each test vector value is encoded as a hexadecimal byte string. The fields of each test vector are described below.

Test vectors with batch size B > 1 have inputs separated by a comma ",". Applicable test vectors will have B different values for the "Input", "Blind", "BlindedElement", "EvaluationElement", and "Output" fields.

The server key material, pkSm and skSm, are listed under the mode for each ciphersuite. Both pkSm and skSm are the serialized values of pkS and skS, respectively, as used in the protocol. Each key pair is derived from a seed Seed and info string KeyInfo, which are listed as well, using the DeriveKeyPair function from Section 3.2.

A.1. ristretto255-SHA512

A.1.1. OPRF Mode 

Seed = a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a
3a3
KeyInfo = 74657374206b6579
skSm = 5ebcea5ee37023ccb9fc2d2019f9d7737be85591ae8652ffa9ef0f4d37063
b0e
A.1.1.1. Test Vector 1, Batch Size 1 
Input = 00
Blind = 64d37aed22a27f5191de1c1d69fadb899d8862b58eb4220029e036ec4c1f
6706
BlindedElement = 609a0ae68c15a3cf6903766461307e5c8bb2f95e7e6550e1ffa
2dc99e412803c
EvaluationElement = 7ec6578ae5120958eb2db1745758ff379e77cb64fe77b0b2
d8cc917ea0869c7e
Output = 527759c3d9366f277d8c6020418d96bb393ba2afb20ff90df23fb770826
4e2f3ab9135e3bd69955851de4b1f9fe8a0973396719b7912ba9ee8aa7d0b5e24bcf
6
A.1.1.2. Test Vector 2, Batch Size 1 
Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Blind = 64d37aed22a27f5191de1c1d69fadb899d8862b58eb4220029e036ec4c1f
6706
BlindedElement = da27ef466870f5f15296299850aa088629945a17d1f5b7f5ff0
43f76b3c06418
EvaluationElement = b4cbf5a4f1eeda5a63ce7b77c7d23f461db3fcab0dd28e4e
17cecb5c90d02c25
Output = f4a74c9c592497375e796aa837e907b1a045d34306a749db9f34221f7e7
50cb4f2a6413a6bf6fa5e19ba6348eb673934a722a7ede2e7621306d18951e7cf2c7
3

A.1.2. VOPRF Mode 

Seed = a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a
3a3
KeyInfo = 74657374206b6579
skSm = e6f73f344b79b379f1a0dd37e07ff62e38d9f71345ce62ae3a9bc60b04ccd
909
pkSm = c803e2cc6b05fc15064549b5920659ca4a77b2cca6f04f6b357009335476a
d4e
A.1.2.1. Test Vector 1, Batch Size 1 
Input = 00
Blind = 64d37aed22a27f5191de1c1d69fadb899d8862b58eb4220029e036ec4c1f
6706
BlindedElement = 863f330cc1a1259ed5a5998a23acfd37fb4351a793a5b3c090b
642ddc439b945
EvaluationElement = aa8fa048764d5623868679402ff6108d2521884fa138cd7f
9c7669a9a014267e
Proof = ddef93772692e535d1a53903db24367355cc2cc78de93b3be5a8ffcc6985
dd066d4346421d17bf5117a2a1ff0fcb2a759f58a539dfbe857a40bce4cf49ec600d
ProofRandomScalar = 222a5e897cf59db8145db8d16e597e8facb80ae7d4e26d98
81aa6f61d645fc0e
Output = b58cfbe118e0cb94d79b5fd6a6dafb98764dff49c14e1770b566e42402d
a1a7da4d8527693914139caee5bd03903af43a491351d23b430948dd50cde10d32b3
c
A.1.2.2. Test Vector 2, Batch Size 1 
Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Blind = 64d37aed22a27f5191de1c1d69fadb899d8862b58eb4220029e036ec4c1f
6706
BlindedElement = cc0b2a350101881d8a4cba4c80241d74fb7dcbfde4a61fde2f9
1443c2bf9ef0c
EvaluationElement = 60a59a57208d48aca71e9e850d22674b611f752bed48b36f
7a91b372bd7ad468
Proof = 401a0da6264f8cf45bb2f5264bc31e109155600babb3cd4e5af7d181a2c9
dc0a67154fabf031fd936051dec80b0b6ae29c9503493dde7393b722eafdf5a50b02
ProofRandomScalar = 222a5e897cf59db8145db8d16e597e8facb80ae7d4e26d98
81aa6f61d645fc0e
Output = 8a9a2f3c7f085b65933594309041fc1898d42d0858e59f90814ae90571a
6df60356f4610bf816f27afdd84f47719e480906d27ecd994985890e5f539e7ea74b
6
A.1.2.3. Test Vector 3, Batch Size 2 
Input = 00,5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Blind = 64d37aed22a27f5191de1c1d69fadb899d8862b58eb4220029e036ec4c1f
6706,222a5e897cf59db8145db8d16e597e8facb80ae7d4e26d9881aa6f61d645fc0
e
BlindedElement = 863f330cc1a1259ed5a5998a23acfd37fb4351a793a5b3c090b
642ddc439b945,90a0145ea9da29254c3a56be4fe185465ebb3bf2a1801f7124bbba
dac751e654
EvaluationElement = aa8fa048764d5623868679402ff6108d2521884fa138cd7f
9c7669a9a014267e,cc5ac221950a49ceaa73c8db41b82c20372a4c8d63e5dded2db
920b7eee36a2a
Proof = cc203910175d786927eeb44ea847328047892ddf8590e723c37205cb7460
0b0a5ab5337c8eb4ceae0494c2cf89529dcf94572ed267473d567aeed6ab873dee08
ProofRandomScalar = 419c4f4f5052c53c45f3da494d2b67b220d02118e0857cdb
cf037f9ea84bbe0c
Output = b58cfbe118e0cb94d79b5fd6a6dafb98764dff49c14e1770b566e42402d
a1a7da4d8527693914139caee5bd03903af43a491351d23b430948dd50cde10d32b3
c,8a9a2f3c7f085b65933594309041fc1898d42d0858e59f90814ae90571a6df6035
6f4610bf816f27afdd84f47719e480906d27ecd994985890e5f539e7ea74b6

A.1.3. POPRF Mode 

Seed = a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a
3a3
KeyInfo = 74657374206b6579
skSm = 145c79c108538421ac164ecbe131942136d5570b16d8bf41a24d4337da981
e07
pkSm = c647bef38497bc6ec077c22af65b696efa43bff3b4a1975a3e8e0a1c5a79d
631
A.1.3.1. Test Vector 1, Batch Size 1 
Input = 00
Info = 7465737420696e666f
Blind = 64d37aed22a27f5191de1c1d69fadb899d8862b58eb4220029e036ec4c1f
6706
BlindedElement = c8713aa89241d6989ac142f22dba30596db635c772cbf25021f
dd8f3d461f715
EvaluationElement = 1a4b860d808ff19624731e67b5eff20ceb2df3c3c03b906f
5693e2078450d874
Proof = 41ad1a291aa02c80b0915fbfbb0c0afa15a57e2970067a602ddb9e8fd6b7
100de32e1ecff943a36f0b10e3dae6bd266cdeb8adf825d86ef27dbc6c0e30c52206
ProofRandomScalar = 222a5e897cf59db8145db8d16e597e8facb80ae7d4e26d98
81aa6f61d645fc0e
Output = ca688351e88afb1d841fde4401c79efebb2eb75e7998fa9737bd5a82a15
2406d38bd29f680504e54fd4587eddcf2f37a2617ac2fbd2993f7bdf45442ace7d22
1
A.1.3.2. Test Vector 2, Batch Size 1 
Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Info = 7465737420696e666f
Blind = 64d37aed22a27f5191de1c1d69fadb899d8862b58eb4220029e036ec4c1f
6706
BlindedElement = f0f0b209dd4d5f1844dac679acc7761b91a2e704879656cb7c2
01e82a99ab07d
EvaluationElement = 8c3c9d064c334c6991e99f286ea2301d1bde170b54003fb9
c44c6d7bd6fc1540
Proof = 4c39992d55ffba38232cdac88fe583af8a85441fefd7d1d4a8d0394cd1de
77018bf135c174f20281b3341ab1f453fe72b0293a7398703384bed822bfdeec8908
ProofRandomScalar = 222a5e897cf59db8145db8d16e597e8facb80ae7d4e26d98
81aa6f61d645fc0e
Output = 7c6557b276a137922a0bcfc2aa2b35dd78322bd500235eb6d6b6f91bc5b
56a52de2d65612d503236b321f5d0bebcbc52b64b92e426f29c9b8b69f52de98ae50
7
A.1.3.3. Test Vector 3, Batch Size 2 
Input = 00,5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Info = 7465737420696e666f
Blind = 64d37aed22a27f5191de1c1d69fadb899d8862b58eb4220029e036ec4c1f
6706,222a5e897cf59db8145db8d16e597e8facb80ae7d4e26d9881aa6f61d645fc0
e
BlindedElement = c8713aa89241d6989ac142f22dba30596db635c772cbf25021f
dd8f3d461f715,423a01c072e06eb1cce96d23acce06e1ea64a609d7ec9e9023f304
9f2d64e50c
EvaluationElement = 1a4b860d808ff19624731e67b5eff20ceb2df3c3c03b906f
5693e2078450d874,aa1f16e903841036e38075da8a46655c94fc92341887eb5819f
46312adfc0504
Proof = 43fdb53be399cbd3561186ae480320caa2b9f36cca0e5b160c4a677b8bbf
4301b28f12c36aa8e11e5a7ef551da0781e863a6dc8c0b2bf5a149c9e00621f02006
ProofRandomScalar = 419c4f4f5052c53c45f3da494d2b67b220d02118e0857cdb
cf037f9ea84bbe0c
Output = ca688351e88afb1d841fde4401c79efebb2eb75e7998fa9737bd5a82a15
2406d38bd29f680504e54fd4587eddcf2f37a2617ac2fbd2993f7bdf45442ace7d22
1,7c6557b276a137922a0bcfc2aa2b35dd78322bd500235eb6d6b6f91bc5b56a52de
2d65612d503236b321f5d0bebcbc52b64b92e426f29c9b8b69f52de98ae507

A.2. decaf448-SHAKE256

A.2.1. OPRF Mode 

Seed = a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a
3a3
KeyInfo = 74657374206b6579
skSm = e8b1375371fd11ebeb224f832dcc16d371b4188951c438f751425699ed29e
cc80c6c13e558ccd67634fd82eac94aa8d1f0d7fee990695d1e
A.2.1.1. Test Vector 1, Batch Size 1 
Input = 00
Blind = 64d37aed22a27f5191de1c1d69fadb899d8862b58eb4220029e036ec65fa
3833a26e9388336361686ff1f83df55046504dfecad8549ba112
BlindedElement = e0ae01c4095f08e03b19baf47ffdc19cb7d98e583160522a3c7
d6a0b2111cd93a126a46b7b41b730cd7fc943d4e28e590ed33ae475885f6c
EvaluationElement = 50ce4e60eed006e22e7027454b5a4b8319eb2bc8ced609eb
19eb3ad42fb19e06ba12d382cbe7ae342a0cad6ead0ef8f91f00bb7f0cd9c0a2
Output = 37d3f7922d9388a15b561de5829bbf654c4089ede89c0ce0f3f85bcdba0
9e382ce0ab3507e021f9e79706a1798ffeac68ebd5cf62e5eb9838c7068351d97ae3
7
A.2.1.2. Test Vector 2, Batch Size 1 
Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Blind = 64d37aed22a27f5191de1c1d69fadb899d8862b58eb4220029e036ec65fa
3833a26e9388336361686ff1f83df55046504dfecad8549ba112
BlindedElement = 86a88dc5c6331ecfcb1d9aacb50a68213803c462e377577cacc
00af28e15f0ddbc2e3d716f2f39ef95f3ec1314a2c64d940a9f295d8f13bb
EvaluationElement = 162e9fa6e9d527c3cd734a31bf122a34dbd5bcb7bb23651f
1768a7a9274cc116c03b58afa6f0dede3994a60066c76370e7328e7062fd5819
Output = a2a652290055cb0f6f8637a249ee45e32ef4667db0b4c80c0a70d2a6416
4d01525cfdad5d870a694ec77972b9b6ec5d2596a5223e5336913f945101f0137f55
e

A.2.2. VOPRF Mode 

Seed = a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a
3a3
KeyInfo = 74657374206b6579
skSm = e3c01519a076a326a0eb566343e9b21c115fa18e6e85577ddbe890b33104f
cc2835ddfb14a928dc3f5d79b936e17c76b99e0bf6a1680930e
pkSm = 945fc518c47695cf65217ace04b86ac5e4cbe26ca649d52854bb16c494ce0
9069d6add96b20d4b0ae311a87c9a73e3a146b525763ab2f955
A.2.2.1. Test Vector 1, Batch Size 1 
Input = 00
Blind = 64d37aed22a27f5191de1c1d69fadb899d8862b58eb4220029e036ec65fa
3833a26e9388336361686ff1f83df55046504dfecad8549ba112
BlindedElement = 7261bbc335c664ba788f1b1a1a4cd5190cc30e787ef277665ac
1d314f8861e3ec11854ce3ddd42035d9e0f5cddde324c332d8c880abc00eb
EvaluationElement = ca1491a526c28d880806cf0fb0122222392cf495657be6e4
c9d203bceffa46c86406caf8217859d3fb259077af68e5d41b3699410781f467
Proof = f84bbeee47aedf43558dae4b95b3853635a9fc1a9ea7eac9b454c64c66c4
f49cd1c72711c7ac2e06c681e16ea693d5500bbd7b56455df52f69e00b76b4126961
e1562fdbaaac40b7701065cbeece3febbfe09e00160f81775d36daed99d8a2a10be0
759e01b7ee81217203416c9db208
ProofRandomScalar = b1b748135d405ce48c6973401d9455bb8ccd18b01d0295c0
627f67661200dbf9569f73fbb3925daa043a070e5f953d80bb464ea369e5522b
Output = e2ac40b634f36cccd8262b285adff7c9dcc19cd308564a5f4e581d1a853
5773b86fa4fc9f2203c370763695c5093aea4a7aedec4488b1340ba3bf663a23098c
1
A.2.2.2. Test Vector 2, Batch Size 1 
Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Blind = 64d37aed22a27f5191de1c1d69fadb899d8862b58eb4220029e036ec65fa
3833a26e9388336361686ff1f83df55046504dfecad8549ba112
BlindedElement = 88287e553939090b888ddc15913e1807dc4757215555e1c3a79
488ef311594729c7fa74c772a732b78440b7d66d0aa35f3bb316f1d93e1b2
EvaluationElement = c00978c73e8e4ee1d447ab0d3ad1754055e72cc85c08e3a0
db170909a9c61cbff1f1e7015f289e3038b0f341faea5d7780c130106065c231
Proof = 7a2831a6b237e11ac1657d440df93bc5ce00f552e6020a99d5c956ffc4d0
7b5ade3e82ecdc257fd53d76239e733e0a1313e84ce16cc0d82734806092a693d7e8
d3c420c2cb6ccd5d0ca32514fb78e9ad0973ebdcb52eba438fc73948d76339ee7101
21d83e2fe6f001cfdf551aff9f36
ProofRandomScalar = b1b748135d405ce48c6973401d9455bb8ccd18b01d0295c0
627f67661200dbf9569f73fbb3925daa043a070e5f953d80bb464ea369e5522b
Output = 862952380e07ec840d9f6e6f909c5a25d16c3dacb586d89a181b4aa7380
c959baa8c480fe8e6c64e089d68ea7aeeb5817bd524d7577905b5bab487690048c94
1
A.2.2.3. Test Vector 3, Batch Size 2 
Input = 00,5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Blind = 64d37aed22a27f5191de1c1d69fadb899d8862b58eb4220029e036ec65fa
3833a26e9388336361686ff1f83df55046504dfecad8549ba112,b1b748135d405ce
48c6973401d9455bb8ccd18b01d0295c0627f67661200dbf9569f73fbb3925daa043
a070e5f953d80bb464ea369e5522b
BlindedElement = 7261bbc335c664ba788f1b1a1a4cd5190cc30e787ef277665ac
1d314f8861e3ec11854ce3ddd42035d9e0f5cddde324c332d8c880abc00eb,2e15f3
93c035492a1573627a3606e528c6294c767c8d43b8c691ef70a52cc7dc7d1b53fe45
8350a270abb7c231b87ba58266f89164f714d9
EvaluationElement = ca1491a526c28d880806cf0fb0122222392cf495657be6e4
c9d203bceffa46c86406caf8217859d3fb259077af68e5d41b3699410781f467,8ec
68e9871b296e81c55647ce64a04fe75d19932f1400544cd601468c60f998408bbb54
6601d4a636e8be279e558d70b95c8d4a4f61892be
Proof = 167d922f0a6ffa845eed07f8aa97b6ac746d902ecbeb18f49c009adc0521
eab1e4d275b74a2dc266b7a194c854e85e7eb54a9a36376dfc04ec7f3bd55fc9618c
3970cb548e064f8a2f06183a5702933dbc3e4c25a73438f2108ee1981c306181003c
7ea92fce963ec7b4ba4f270e6d38
ProofRandomScalar = 63798726803c9451ba405f00ef3acb633ddf0c420574a2ec
6cbf28f840800e355c9fbaac10699686de2724ed22e797a00f3bd93d105a7f23
Output = e2ac40b634f36cccd8262b285adff7c9dcc19cd308564a5f4e581d1a853
5773b86fa4fc9f2203c370763695c5093aea4a7aedec4488b1340ba3bf663a23098c
1,862952380e07ec840d9f6e6f909c5a25d16c3dacb586d89a181b4aa7380c959baa
8c480fe8e6c64e089d68ea7aeeb5817bd524d7577905b5bab487690048c941

A.2.3. POPRF Mode 

Seed = a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a
3a3
KeyInfo = 74657374206b6579
skSm = 792a10dcbd3ba4a52a054f6f39186623208695301e7adb9634b74709ab22d
e402990eb143fd7c67ac66be75e0609705ecea800992aac8e19
pkSm = 6c9d12723a5bbcf305522cc04b4a34d9ced2e12831826018ea7b5dcf54526
47ad262113059bf0f6e4354319951b9d513c74f29cb0eec38c1
A.2.3.1. Test Vector 1, Batch Size 1 
Input = 00
Info = 7465737420696e666f
Blind = 64d37aed22a27f5191de1c1d69fadb899d8862b58eb4220029e036ec65fa
3833a26e9388336361686ff1f83df55046504dfecad8549ba112
BlindedElement = 161183c13c6cb33b0e4f9b7365f8c5c12d13c72f8b62d276ca0
9368d093dce9b42198276b9e9d870ac392dda53efd28d1b7e6e8c060cdc42
EvaluationElement = 06ec89dfde25bb2a6f0145ac84b91ac277b35de39ad1d6f4
02a8e46414952ce0d9ea1311a4ece283e2b01558c7078b040cfaa40dd63b3e6c
Proof = 66caee75bf2460429f620f6ad3e811d524cb8ddd848a435fc5d89af48877
abf6506ee341a0b6f67c2d76cd021e5f3d1c9abe5aa9f0dce016da746135fedba2af
41ed1d01659bfd6180d96bc1b7f320c0cb6926011ce392ecca748662564892bae665
16acaac6ca39aadf6fcca95af406
ProofRandomScalar = b1b748135d405ce48c6973401d9455bb8ccd18b01d0295c0
627f67661200dbf9569f73fbb3925daa043a070e5f953d80bb464ea369e5522b
Output = 4423f6dcc1740688ea201de57d76824d59cd6b859e1f9884b7eebc49b0b
971358cf9cb075df1536a8ea31bcf55c3e31c2ba9cfa8efe54448d17091daeb9924e
d
A.2.3.2. Test Vector 2, Batch Size 1 
Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Info = 7465737420696e666f
Blind = 64d37aed22a27f5191de1c1d69fadb899d8862b58eb4220029e036ec65fa
3833a26e9388336361686ff1f83df55046504dfecad8549ba112
BlindedElement = 12082b6a381c6c51e85d00f2a3d828cdeab3f5cb19a10b9c014
c33826764ab7e7cfb8b4ff6f411bddb2d64e62a472af1cd816e5b712790c6
EvaluationElement = f2919b7eedc05ab807c221fce2b12c4ae9e19e6909c47845
64b690d1972d2994ca623f273afc67444d84ea40cbc58fcdab7945f321a52848
Proof = a295677c54d1bc4286330907fc2490a7de163da26f9ce03a462a452fea42
2b19ade296ba031359b3b6841e48455d20519ad01b4ac4f0b92e76d3cf16fbef0a3f
72791a8401ef2d7081d361e502e96b2c60608b9fa566f43d4611c2f161d83aabef7f
8017332b26ed1daaf80440772022
ProofRandomScalar = b1b748135d405ce48c6973401d9455bb8ccd18b01d0295c0
627f67661200dbf9569f73fbb3925daa043a070e5f953d80bb464ea369e5522b
Output = 8691905500510843902c44bdd9730ab9dc3925aa58ff9dd42765a2baf63
3126de0c3adb93bef5652f38e5827b6396e87643960163a560fc4ac9738c8de4e4a8
d
A.2.3.3. Test Vector 3, Batch Size 2 
Input = 00,5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Info = 7465737420696e666f
Blind = 64d37aed22a27f5191de1c1d69fadb899d8862b58eb4220029e036ec65fa
3833a26e9388336361686ff1f83df55046504dfecad8549ba112,b1b748135d405ce
48c6973401d9455bb8ccd18b01d0295c0627f67661200dbf9569f73fbb3925daa043
a070e5f953d80bb464ea369e5522b
BlindedElement = 161183c13c6cb33b0e4f9b7365f8c5c12d13c72f8b62d276ca0
9368d093dce9b42198276b9e9d870ac392dda53efd28d1b7e6e8c060cdc42,fc8847
d43fb4cea4e408f585661a8f2867533fa91d22155d3127a22f18d3b007add480f7d3
00bca93fa47fe87ae06a57b7d0f0d4c30b12f0
EvaluationElement = 06ec89dfde25bb2a6f0145ac84b91ac277b35de39ad1d6f4
02a8e46414952ce0d9ea1311a4ece283e2b01558c7078b040cfaa40dd63b3e6c,2e7
4c626d07de49b1c8c21d87120fd78105f485e36816af9bde3e3efbeef76815326062
fd333925b66c5ce5a20f100bf01770c16609f990a
Proof = fd94db736f97ea4efe9d0d4ad2933072697a6bbeb32834057b23edf7c700
9f011dfa72157f05d2a507c2bbf0b54cad99ab99de05921c021fda7d70e65bcecdb0
5f9a30154127ace983c74d10fd910b554c5e95f6bd1565fd1f3dbbe3c523ece5c72d
57a559b7be1368c4786db4a3c910
ProofRandomScalar = 63798726803c9451ba405f00ef3acb633ddf0c420574a2ec
6cbf28f840800e355c9fbaac10699686de2724ed22e797a00f3bd93d105a7f23
Output = 4423f6dcc1740688ea201de57d76824d59cd6b859e1f9884b7eebc49b0b
971358cf9cb075df1536a8ea31bcf55c3e31c2ba9cfa8efe54448d17091daeb9924e
d,8691905500510843902c44bdd9730ab9dc3925aa58ff9dd42765a2baf633126de0
c3adb93bef5652f38e5827b6396e87643960163a560fc4ac9738c8de4e4a8d

A.3. P256-SHA256

A.3.1. OPRF Mode 

Seed = a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a
3a3
KeyInfo = 74657374206b6579
skSm = 159749d750713afe245d2d39ccfaae8381c53ce92d098a9375ee70739c7ac
0bf
A.3.1.1. Test Vector 1, Batch Size 1 
Input = 00
Blind = 3338fa65ec36e0290022b48eb562889d89dbfa691d1cde91517fa222ed7a
d364
BlindedElement = 03723a1e5c09b8b9c18d1dcbca29e8007e95f14f4732d9346d4
90ffc195110368d
EvaluationElement = 030de02ffec47a1fd53efcdd1c6faf5bdc270912b8749e78
3c7ca75bb412958832
Output = a0b34de5fa4c5b6da07e72af73cc507cceeb48981b97b7285fc375345fe
495dd
A.3.1.2. Test Vector 2, Batch Size 1 
Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Blind = 3338fa65ec36e0290022b48eb562889d89dbfa691d1cde91517fa222ed7a
d364
BlindedElement = 03cc1df781f1c2240a64d1c297b3f3d16262ef5d4cf10273488
2675c26231b0838
EvaluationElement = 03a0395fe3828f2476ffcd1f4fe540e5a8489322d398be3c
4e5a869db7fcb7c52c
Output = c748ca6dd327f0ce85f4ae3a8cd6d4d5390bbb804c9e12dcf94f853fece
3dcce

A.3.2. VOPRF Mode 

Seed = a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a
3a3
KeyInfo = 74657374206b6579
skSm = ca5d94c8807817669a51b196c34c1b7f8442fde4334a7121ae4736364312f
ca6
pkSm = 03e17e70604bcabe198882c0a1f27a92441e774224ed9c702e51dd17038b1
02462
A.3.2.1. Test Vector 1, Batch Size 1 
Input = 00
Blind = 3338fa65ec36e0290022b48eb562889d89dbfa691d1cde91517fa222ed7a
d364
BlindedElement = 02dd05901038bb31a6fae01828fd8d0e49e35a486b5c5d4b499
4013648c01277da
EvaluationElement = 0209f33cab60cf8fe69239b0afbcfcd261af4c1c5632624f
2e9ba29b90ae83e4a2
Proof = e7c2b3c5c954c035949f1f74e6bce2ed539a3be267d1481e9ddb178533df
4c2664f69d065c604a4fd953e100b856ad83804eb3845189babfa5a702090d6fc5fa
ProofRandomScalar = f9db001266677f62c095021db018cd8cbb55941d4073698c
e45c405d1348b7b1
Output = 0412e8f78b02c415ab3a288e228978376f99927767ff37c5718d420010a
645a1
A.3.2.2. Test Vector 2, Batch Size 1 
Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Blind = 3338fa65ec36e0290022b48eb562889d89dbfa691d1cde91517fa222ed7a
d364
BlindedElement = 03cd0f033e791c4d79dfa9c6ed750f2ac009ec46cd4195ca6fd
3800d1e9b887dbd
EvaluationElement = 030d2985865c693bf7af47ba4d3a3813176576383d19aff0
03ef7b0784a0d83cf1
Proof = 2787d729c57e3d9512d3aa9e8708ad226bc48e0f1750b0767aaff73482c4
4b8d2873d74ec88aebd3504961acea16790a05c542d9fbff4fe269a77510db00abab
ProofRandomScalar = f9db001266677f62c095021db018cd8cbb55941d4073698c
e45c405d1348b7b1
Output = 771e10dcd6bcd3664e23b8f2a710cfaaa8357747c4a8cbba03133967b5c
24f18
A.3.2.3. Test Vector 3, Batch Size 2 
Input = 00,5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Blind = 3338fa65ec36e0290022b48eb562889d89dbfa691d1cde91517fa222ed7a
d364,f9db001266677f62c095021db018cd8cbb55941d4073698ce45c405d1348b7b
1
BlindedElement = 02dd05901038bb31a6fae01828fd8d0e49e35a486b5c5d4b499
4013648c01277da,03462e9ae64cae5b83ba98a6b360d942266389ac369b923eb3d5
57213b1922f8ab
EvaluationElement = 0209f33cab60cf8fe69239b0afbcfcd261af4c1c5632624f
2e9ba29b90ae83e4a2,02bb24f4d838414aef052a8f044a6771230ca69c0a5677540
fff738dd31bb69771
Proof = bdcc351707d02a72ce49511c7db990566d29d6153ad6f8982fad2b435d6c
e4d60da1e6b3fa740811bde34dd4fe0aa1b5fe6600d0440c9ddee95ea7fad7a60cf2
ProofRandomScalar = 350e8040f828bf6ceca27405420cdf3d63cb3aef005f40ba
51943c8026877963
Output = 0412e8f78b02c415ab3a288e228978376f99927767ff37c5718d420010a
645a1,771e10dcd6bcd3664e23b8f2a710cfaaa8357747c4a8cbba03133967b5c24f
18

A.3.3. POPRF Mode 

Seed = a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a
3a3
KeyInfo = 74657374206b6579
skSm = 6ad2173efa689ef2c27772566ad7ff6e2d59b3b196f00219451fb2c89ee4d
ae2
pkSm = 030d7ff077fddeec965db14b794f0cc1ba9019b04a2f4fcc1fa525dedf72e
2a3e3
A.3.3.1. Test Vector 1, Batch Size 1 
Input = 00
Info = 7465737420696e666f
Blind = 3338fa65ec36e0290022b48eb562889d89dbfa691d1cde91517fa222ed7a
d364
BlindedElement = 031563e127099a8f61ed51eeede05d747a8da2be329b40ba1f0
db0b2bd9dd4e2c0
EvaluationElement = 02c5e5300c2d9e6ba7f3f4ad60500ad93a0157e6288eb04b
67e125db024a2c74d2
Proof = f8a33690b87736c854eadfcaab58a59b8d9c03b569110b6f31f8bf7577f3
fbb85a8a0c38468ccde1ba942be501654adb106167c8eb178703ccb42bccffb9231a
ProofRandomScalar = f9db001266677f62c095021db018cd8cbb55941d4073698c
e45c405d1348b7b1
Output = 193a92520bd8fd1f37accb918040a57108daa110dc4f659abe212636d24
5c592
A.3.3.2. Test Vector 2, Batch Size 1 
Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Info = 7465737420696e666f
Blind = 3338fa65ec36e0290022b48eb562889d89dbfa691d1cde91517fa222ed7a
d364
BlindedElement = 021a440ace8ca667f261c10ac7686adc66a12be31e3520fca31
7643a1eee9dcd4d
EvaluationElement = 0208ca109cbae44f4774fc0bdd2783efdcb868cb4523d521
96f700210e777c5de3
Proof = 043a8fb7fc7fd31e35770cabda4753c5bf0ecc1e88c68d7d35a62bf2631e
875af4613641be2d1875c31d1319d191c4bbc0d04875f4fd03c31d3d17dd8e069b69
ProofRandomScalar = f9db001266677f62c095021db018cd8cbb55941d4073698c
e45c405d1348b7b1
Output = 1e6d164cfd835d88a31401623549bf6b9b306628ef03a7962921d62bc5f
fce8c
A.3.3.3. Test Vector 3, Batch Size 2 
Input = 00,5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Info = 7465737420696e666f
Blind = 3338fa65ec36e0290022b48eb562889d89dbfa691d1cde91517fa222ed7a
d364,f9db001266677f62c095021db018cd8cbb55941d4073698ce45c405d1348b7b
1
BlindedElement = 031563e127099a8f61ed51eeede05d747a8da2be329b40ba1f0
db0b2bd9dd4e2c0,03ca4ff41c12fadd7a0bc92cf856732b21df652e01a3abdf0fa8
847da053db213c
EvaluationElement = 02c5e5300c2d9e6ba7f3f4ad60500ad93a0157e6288eb04b
67e125db024a2c74d2,02f0b6bcd467343a8d8555a99dc2eed0215c71898c5edb77a
3d97ddd0dbad478e8
Proof = 8fbd85a32c13aba79db4b42e762c00687d6dbf9c8cb97b2a225645ccb00d
9d7580b383c885cdfd07df448d55e06f50f6173405eee5506c0ed0851ff718d13e68
ProofRandomScalar = 350e8040f828bf6ceca27405420cdf3d63cb3aef005f40ba
51943c8026877963
Output = 193a92520bd8fd1f37accb918040a57108daa110dc4f659abe212636d24
5c592,1e6d164cfd835d88a31401623549bf6b9b306628ef03a7962921d62bc5ffce
8c

A.4. P384-SHA384

A.4.1. OPRF Mode 

Seed = a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a
3a3
KeyInfo = 74657374206b6579
skSm = dfe7ddc41a4646901184f2b432616c8ba6d452f9bcd0c4f75a5150ef2b2ed
02ef40b8b92f60ae591bcabd72a6518f188
A.4.1.1. Test Vector 1, Batch Size 1 
Input = 00
Blind = 504650f53df8f16f6861633388936ea23338fa65ec36e0290022b48eb562
889d89dbfa691d1cde91517fa222ed7ad364
BlindedElement = 02a36bc90e6db34096346eaf8b7bc40ee1113582155ad379700
3ce614c835a874343701d3f2debbd80d97cbe45de6e5f1f
EvaluationElement = 03af2a4fc94770d7a7bf3187ca9cc4faf3732049eded2442
ee50fbddda58b70ae2999366f72498cdbc43e6f2fc184afe30
Output = ed84ad3f31a552f0456e58935fcc0a3039db42e7f356dcb32aa6d487b6b
815a07d5813641fb1398c03ddab5763874357
A.4.1.2. Test Vector 2, Batch Size 1 
Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Blind = 504650f53df8f16f6861633388936ea23338fa65ec36e0290022b48eb562
889d89dbfa691d1cde91517fa222ed7ad364
BlindedElement = 02def6f418e3484f67a124a2ce1bfb19de7a4af568ede6a1ebb
2733882510ddd43d05f2b1ab5187936a55e50a847a8b900
EvaluationElement = 034e9b9a2960b536f2ef47d8608b21597ba400d5abfa1825
fd21c36b75f927f396bf3716c96129d1fa4a77fa1d479c8d7b
Output = dd4f29da869ab9355d60617b60da0991e22aaab243a3460601e48b07585
9d1c526d36597326f1b985778f781a1682e75

A.4.2. VOPRF Mode 

Seed = a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a
3a3
KeyInfo = 74657374206b6579
skSm = 051646b9e6e7a71ae27c1e1d0b87b4381db6d3595eeeb1adb41579adbf992
f4278f9016eafc944edaa2b43183581779d
pkSm = 031d689686c611991b55f1a1d8f4305ccd6cb719446f660a30db61b7aa87b
46acf59b7c0d4a9077b3da21c25dd482229a0
A.4.2.1. Test Vector 1, Batch Size 1 
Input = 00
Blind = 504650f53df8f16f6861633388936ea23338fa65ec36e0290022b48eb562
889d89dbfa691d1cde91517fa222ed7ad364
BlindedElement = 02d338c05cbecb82de13d6700f09cb61190543a7b7e2c6cd4fc
a56887e564ea82653b27fdad383995ea6d02cf26d0e24d9
EvaluationElement = 02a7bba589b3e8672aa19e8fd258de2e6aae20101c8d7612
46de97a6b5ee9cf105febce4327a326255a3c604f63f600ef6
Proof = bfc6cf3859127f5fe25548859856d6b7fa1c7459f0ba5712a806fc091a30
00c42d8ba34ff45f32a52e40533efd2a03bc87f3bf4f9f58028297ccb9ccb18ae718
2bcd1ef239df77e3be65ef147f3acf8bc9cbfc5524b702263414f043e3b7ca2e
ProofRandomScalar = 803d955f0e073a04aa5d92b3fb739f56f9db001266677f62
c095021db018cd8cbb55941d4073698ce45c405d1348b7b1
Output = 3333230886b562ffb8329a8be08fea8025755372817ec969d114d1203d0
26b4a622beab60220bf19078bca35a529b35c
A.4.2.2. Test Vector 2, Batch Size 1 
Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Blind = 504650f53df8f16f6861633388936ea23338fa65ec36e0290022b48eb562
889d89dbfa691d1cde91517fa222ed7ad364
BlindedElement = 02f27469e059886f221be5f2cca03d2bdc61e55221721c3b3e5
6fc012e36d31ae5f8dc058109591556a6dbd3a8c69c433b
EvaluationElement = 03f16f903947035400e96b7f531a38d4a07ac89a80f89d86
a1bf089c525a92c7f4733729ca30c56ce78b1ab4f7d92db8b4
Proof = d005d6daaad7571414c1e0c75f7e57f2113ca9f4604e84bc90f9be52da89
6fff3bee496dcde2a578ae9df315032585f801fb21c6080ac05672b291e575a40295
b306d967717b28e08fcc8ad1cab47845d16af73b3e643ddcc191208e71c64630
ProofRandomScalar = 803d955f0e073a04aa5d92b3fb739f56f9db001266677f62
c095021db018cd8cbb55941d4073698ce45c405d1348b7b1
Output = b91c70ea3d4d62ba922eb8a7d03809a441e1c3c7af915cbc2226f485213
e895942cd0f8580e6d99f82221e66c40d274f
A.4.2.3. Test Vector 3, Batch Size 2 
Input = 00,5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Blind = 504650f53df8f16f6861633388936ea23338fa65ec36e0290022b48eb562
889d89dbfa691d1cde91517fa222ed7ad364,803d955f0e073a04aa5d92b3fb739f5
6f9db001266677f62c095021db018cd8cbb55941d4073698ce45c405d1348b7b1
BlindedElement = 02d338c05cbecb82de13d6700f09cb61190543a7b7e2c6cd4fc
a56887e564ea82653b27fdad383995ea6d02cf26d0e24d9,02fa02470d7f151018b4
1e82223c32fad824de6ad4b5ce9f8e9f98083c9a726de9a1fc39d7a0cb6f4f188dd9
cea01474cd
EvaluationElement = 02a7bba589b3e8672aa19e8fd258de2e6aae20101c8d7612
46de97a6b5ee9cf105febce4327a326255a3c604f63f600ef6,028e9e115625ff4c2
f07bf87ce3fd73fc77994a7a0c1df03d2a630a3d845930e2e63a165b114d98fe34e6
1b68d23c0b50a
Proof = 6d8dcbd2fc95550a02211fb78afd013933f307d21e7d855b0b1ed0af7807
6d8137ad8b0a1bfa05676d325249c1dbb9a52bd81b1c2b7b0efc77cf7b278e1c947f
6283f1d4c513053fc0ad19e026fb0c30654b53d9cea4b87b037271b5d2e2d0ea
ProofRandomScalar = a097e722ed2427de86966910acba9f5c350e8040f828bf6c
eca27405420cdf3d63cb3aef005f40ba51943c8026877963
Output = 3333230886b562ffb8329a8be08fea8025755372817ec969d114d1203d0
26b4a622beab60220bf19078bca35a529b35c,b91c70ea3d4d62ba922eb8a7d03809
a441e1c3c7af915cbc2226f485213e895942cd0f8580e6d99f82221e66c40d274f

A.4.3. POPRF Mode 

Seed = a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a
3a3
KeyInfo = 74657374206b6579
skSm = 5b2690d6954b8fbb159f19935d64133f12770c00b68422559c65431942d72
1ff79d47d7a75906c30b7818ec0f38b7fb2
pkSm = 02f00f0f1de81e5d6cf18140d4926ffdc9b1898c48dc49657ae36eb1e45de
b8b951aaf1f10c82d2eaa6d02aafa3f10d2b6
A.4.3.1. Test Vector 1, Batch Size 1 
Input = 00
Info = 7465737420696e666f
Blind = 504650f53df8f16f6861633388936ea23338fa65ec36e0290022b48eb562
889d89dbfa691d1cde91517fa222ed7ad364
BlindedElement = 03859b36b95e6564faa85cd3801175eda2949707f6aa0640ad0
93cbf8ad2f58e762f08b56b2a1b42a64953aaf49cbf1ae3
EvaluationElement = 0220710e2e00306453f5b4f574cb6a512453f35c45080d09
373e190c19ce5b185914fbf36582d7e0754bb7c8b683205b91
Proof = 82a17ef41c8b57f1e3122311b4d5cd39a63df0f67443ef18d961f9b659c1
601ced8d3c64b294f604319ca80230380d437a49c7af0d620e22116669c008ebb767
d90283d573b49cdb49e3725889620924c2c4b047a2a6225a3ba27e640ebddd33
ProofRandomScalar = 803d955f0e073a04aa5d92b3fb739f56f9db001266677f62
c095021db018cd8cbb55941d4073698ce45c405d1348b7b1
Output = 0188653cfec38119a6c7dd7948b0f0720460b4310e40824e048bf82a165
27303ed449a08caf84272c3bbc972ede797df
A.4.3.2. Test Vector 2, Batch Size 1 
Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Info = 7465737420696e666f
Blind = 504650f53df8f16f6861633388936ea23338fa65ec36e0290022b48eb562
889d89dbfa691d1cde91517fa222ed7ad364
BlindedElement = 03f7efcb4aaf000263369d8a0621cb96b81b3206e99876de2a0
0699ed4c45acf3969cd6e2319215395955d3f8d8cc1c712
EvaluationElement = 034993c818369927e74b77c400376fd1ae29b6ac6c6ddb77
6cf10e4fbc487826531b3cf0b7c8ca4d92c7af90c9def85ce6
Proof = 693471b5dff0cd6a5c00ea34d7bf127b2795164e3bdb5f39a1e5edfbd13e
443bc516061cd5b8449a473c2ceeccada9f3e5b57302e3d7bc5e28d38d6e3a3056e1
e73b6cc030f5180f8a1ffa45aa923ee66d2ad0a07b500f2acc7fb99b5506465c
ProofRandomScalar = 803d955f0e073a04aa5d92b3fb739f56f9db001266677f62
c095021db018cd8cbb55941d4073698ce45c405d1348b7b1
Output = ff2a527a21cc43b251a567382677f078c6e356336aec069dea8ba369953
43ca3b33bb5d6cf15be4d31a7e6d75b30d3f5
A.4.3.3. Test Vector 3, Batch Size 2 
Input = 00,5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Info = 7465737420696e666f
Blind = 504650f53df8f16f6861633388936ea23338fa65ec36e0290022b48eb562
889d89dbfa691d1cde91517fa222ed7ad364,803d955f0e073a04aa5d92b3fb739f5
6f9db001266677f62c095021db018cd8cbb55941d4073698ce45c405d1348b7b1
BlindedElement = 03859b36b95e6564faa85cd3801175eda2949707f6aa0640ad0
93cbf8ad2f58e762f08b56b2a1b42a64953aaf49cbf1ae3,021a65d618d645f1a20b
c33b06deaa7e73d6d634c8a56a3d02b53a732b69a5c53c5a207ea33d5afdcde9a22d
59726bce51
EvaluationElement = 0220710e2e00306453f5b4f574cb6a512453f35c45080d09
373e190c19ce5b185914fbf36582d7e0754bb7c8b683205b91,02017657b315ec65e
f861505e596c8645d94685dd7602cdd092a8f1c1c0194a5d0485fe47d071d972ab51
4370174cc23f5
Proof = 4a0b2fe96d5b2a046a0447fe079b77859ef11a39a3520d6ff7c626aad9b4
73b724fb0cf188974ec961710a62162a83e97e0baa9eeada73397032d928b3e97b1e
a92ad9458208302be3681b8ba78bcc17745bac00f84e0fdc98a6a8cba009c080
ProofRandomScalar = a097e722ed2427de86966910acba9f5c350e8040f828bf6c
eca27405420cdf3d63cb3aef005f40ba51943c8026877963
Output = 0188653cfec38119a6c7dd7948b0f0720460b4310e40824e048bf82a165
27303ed449a08caf84272c3bbc972ede797df,ff2a527a21cc43b251a567382677f0
78c6e356336aec069dea8ba36995343ca3b33bb5d6cf15be4d31a7e6d75b30d3f5

A.5. P521-SHA512

A.5.1. OPRF Mode 

Seed = a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a
3a3
KeyInfo = 74657374206b6579
skSm = 0153441b8faedb0340439036d6aed06d1217b34c42f17f8db4c5cc610a4a9
55d698a688831b16d0dc7713a1aa3611ec60703bffc7dc9c84e3ed673b3dbe1d5fcc
ea6
A.5.1.1. Test Vector 1, Batch Size 1 
Input = 00
Blind = 00d1dccf7a51bafaf75d4a866d53d8cafe4d504650f53df8f16f68616333
88936ea23338fa65ec36e0290022b48eb562889d89dbfa691d1cde91517fa222ed7a
d364
BlindedElement = 0300e78bf846b0e1e1a3c320e353d758583cd876df56100a3a1
e62bacba470fa6e0991be1be80b721c50c5fd0c672ba764457acc18c6200704e9294
fbf28859d916351
EvaluationElement = 030166371cf827cb2fb9b581f97907121a16e2dc5d8b10ce
9f0ede7f7d76a0d047657735e8ad07bcda824907b3e5479bd72cdef6b839b967ba5c
58b118b84d26f2ba07
Output = 26232de6fff83f812adadadb6cc05d7bbeee5dca043dbb16b03488abb99
81d0a1ef4351fad52dbd7e759649af393348f7b9717566c19a6b8856284d69375c80
9
A.5.1.2. Test Vector 2, Batch Size 1 
Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Blind = 00d1dccf7a51bafaf75d4a866d53d8cafe4d504650f53df8f16f68616333
88936ea23338fa65ec36e0290022b48eb562889d89dbfa691d1cde91517fa222ed7a
d364
BlindedElement = 0300c28e57e74361d87e0c1874e5f7cc1cc796d61f9cad50427
cf54655cdb455613368d42b27f94bf66f59f53c816db3e95e68e1b113443d66a99b3
693bab88afb556b
EvaluationElement = 0301ad453607e12d0cc11a3359332a40c3a254eaa1afc642
96528d55bed07ba322e72e22cf3bcb50570fd913cb54f7f09c17aff8787af75f6a7f
af5640cbb2d9620a6e
Output = ad1f76ef939042175e007738906ac0336bbd1d51e287ebaa66901abdd32
4ea3ffa40bfc5a68e7939c2845e0fd37a5a6e76dadb9907c6cc8579629757fd4d04b
a

A.5.2. VOPRF Mode 

Seed = a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a
3a3
KeyInfo = 74657374206b6579
skSm = 015c7fc1b4a0b1390925bae915bd9f3d72009d44d9241b962428aad5d13f2
2803311e7102632a39addc61ea440810222715c9d2f61f03ea424ec9ab1fe5e31cf9
238
pkSm = 0301505d646f6e4c9102451eb39730c4ba1c4087618641edbdba4a60896b0
7fd0c9414ce553cbf25b81dfcca50a8f6724ab7a2bc4d0cf736967a287bb6084cc06
78ac0
A.5.2.1. Test Vector 1, Batch Size 1 
Input = 00
Blind = 00d1dccf7a51bafaf75d4a866d53d8cafe4d504650f53df8f16f68616333
88936ea23338fa65ec36e0290022b48eb562889d89dbfa691d1cde91517fa222ed7a
d364
BlindedElement = 0301d6e4fb545e043ddb6aee5d5ceeee1b44102615ab04430c2
7dd0f56988dedcb1df32ef384f160e0e76e718605f14f3f582f9357553d153b99679
5b4b3628a4f6380
EvaluationElement = 03013fdeaf887f3d3d283a79e696a54b66ff0edcb559265e
204a958acf840e0930cc147e2a6835148d8199eebc26c03e9394c9762a1c991dde40
bca0f8ca003eefb045
Proof = 0077fcc8ec6d059d7759b0a61f871e7c1dadc65333502e09a51994328f79
e5bda3357b9a4f410a1760a3612c2f8f27cb7cb032951c047cc66da60da583df7b24
7edd0188e5eb99c71799af1d80d643af16ffa1545acd9e9233fbb370455b10eb257e
a12a1667c1b4ee5b0ab7c93d50ae89602006960f083ca9adc4f6276c0ad60440393c
ProofRandomScalar = 015e80ae32363b32cb76ad4b95a5a34e46bb803d955f0e07
3a04aa5d92b3fb739f56f9db001266677f62c095021db018cd8cbb55941d4073698c
e45c405d1348b7b1
Output = 5e003d9b2fb540b3d4bab5fedd154912246da1ee5e557afd8f56415faa1
a0fadff6517da802ee254437e4f60907b4cda146e7ba19e249eef7be405549f62954
b
A.5.2.2. Test Vector 2, Batch Size 1 
Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Blind = 00d1dccf7a51bafaf75d4a866d53d8cafe4d504650f53df8f16f68616333
88936ea23338fa65ec36e0290022b48eb562889d89dbfa691d1cde91517fa222ed7a
d364
BlindedElement = 03005b05e656cb609ce5ff5faf063bb746d662d67bbd07c0626
38396f52f0392180cf2365cabb0ece8e19048961d35eeae5d5fa872328dce98df076
ee154dd191c615e
EvaluationElement = 0301b19fcf482b1fff04754e282292ed736c5f0aa080d4f4
2663cd3a416c6596f03129e8e096d8671fe5b0d19838312c511d2ce08d431e43e3ef
06199d8cab7426238d
Proof = 01ec9fece444caa6a57032e8963df0e945286f88fbdf233fb5101f0924f7
ea89c47023f5f72f240e61991fd33a299b5b38c45a5e2dd1a67b072e59dfe86708a3
59c701e38d383c60cf6969463bcf13251bedad47b7941f52e409a3591398e2792441
0b18a301c0e19f527cad504fa08388050ac634e1b05c5216d337742f2754e1fc502f
ProofRandomScalar = 015e80ae32363b32cb76ad4b95a5a34e46bb803d955f0e07
3a04aa5d92b3fb739f56f9db001266677f62c095021db018cd8cbb55941d4073698c
e45c405d1348b7b1
Output = fa15eebba81ecf40954f7135cb76f69ef22c6bae394d1a4362f9b03066b
54b6604d39f2e53369ca6762a3d9787e230e832aa85955af40ecb8deebb009a8cf47
4
A.5.2.3. Test Vector 3, Batch Size 2 
Input = 00,5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Blind = 00d1dccf7a51bafaf75d4a866d53d8cafe4d504650f53df8f16f68616333
88936ea23338fa65ec36e0290022b48eb562889d89dbfa691d1cde91517fa222ed7a
d364,015e80ae32363b32cb76ad4b95a5a34e46bb803d955f0e073a04aa5d92b3fb7
39f56f9db001266677f62c095021db018cd8cbb55941d4073698ce45c405d1348b7b
1
BlindedElement = 0301d6e4fb545e043ddb6aee5d5ceeee1b44102615ab04430c2
7dd0f56988dedcb1df32ef384f160e0e76e718605f14f3f582f9357553d153b99679
5b4b3628a4f6380,0301403b597538b939b450c93586ba275f9711ba07e42364bac1
d5769c6824a8b55be6f9a536df46d952b11ab2188363b3d6737635d9543d4dba14a6
e19421b9245bf5
EvaluationElement = 03013fdeaf887f3d3d283a79e696a54b66ff0edcb559265e
204a958acf840e0930cc147e2a6835148d8199eebc26c03e9394c9762a1c991dde40
bca0f8ca003eefb045,03001f96424497e38c46c904978c2fa1636c5c3dd2e634a85
d8a7265977c5dce1f02c7e6c118479f0751767b91a39cce6561998258591b5d7c1bb
02445a9e08e4f3e8d
Proof = 00b4d215c8405e57c7a4b53398caf55f1f1623aaeb22408ddb9ea2913090
9b3f95dbb1ff366e81e86e918f9f2fd8b80dbb344cd498c9499d112905e585417e00
68c600fe5dea18b389ef6c4cc062935607b8ccbbb9a84fba3143868a3e8a58efa0bf
6ca642804d09dc06e980f64837811227c4267b217f1099a4e28b0854f4e5ee659796
ProofRandomScalar = 01ec21c7bb69b0734cb48dfd68433dd93b0fa097e722ed24
27de86966910acba9f5c350e8040f828bf6ceca27405420cdf3d63cb3aef005f40ba
51943c8026877963
Output = 5e003d9b2fb540b3d4bab5fedd154912246da1ee5e557afd8f56415faa1
a0fadff6517da802ee254437e4f60907b4cda146e7ba19e249eef7be405549f62954
b,fa15eebba81ecf40954f7135cb76f69ef22c6bae394d1a4362f9b03066b54b6604
d39f2e53369ca6762a3d9787e230e832aa85955af40ecb8deebb009a8cf474

A.5.3. POPRF Mode 

Seed = a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a3a
3a3
KeyInfo = 74657374206b6579
skSm = 014893130030ce69cf714f536498a02ff6b396888f9bb507985c32928c442
7d6d39de10ef509aca4240e8569e3a88debc0d392e3361bcd934cb9bdd59e339dff7
b27
pkSm = 0301de8ceb9ffe9237b1bba87c320ea0bebcfc3447fe6f278065c6c69886d
692d1126b79b6844f829940ace9b52a5e26882cf7cbc9e57503d4cca3cd834584729
f812a
A.5.3.1. Test Vector 1, Batch Size 1 
Input = 00
Info = 7465737420696e666f
Blind = 00d1dccf7a51bafaf75d4a866d53d8cafe4d504650f53df8f16f68616333
88936ea23338fa65ec36e0290022b48eb562889d89dbfa691d1cde91517fa222ed7a
d364
BlindedElement = 020095cff9d7ecf65bdfee4ea92d6e748d60b02de34ad98094f
82e25d33a8bf50138ccc2cc633556f1a97d7ea9438cbb394df612f041c485a515849
d5ebb2238f2f0e2
EvaluationElement = 0301408e9c5be3ffcc1c16e5ae8f8aa68446223b0804b119
62e856af5a6d1c65ebbb5db7278c21db4e8cc06d89a35b6804fb1738a295b691638a
f77aa1327253f26d01
Proof = 0106a89a61eee9dd2417d2849a8e2167bc5f56e3aed5a3ff23e22511fa1b
37a29ed44d1bbfd6907d99cfbc558a56aec709282415a864a281e49dc53792a4a638
a0660034306d64be12a94dcea5a6d664cf76681911c8b9a84d49bf12d4893307ec14
436bd05f791f82446c0de4be6c582d373627b51886f76c4788256e3da7ec8fa18a86
ProofRandomScalar = 015e80ae32363b32cb76ad4b95a5a34e46bb803d955f0e07
3a04aa5d92b3fb739f56f9db001266677f62c095021db018cd8cbb55941d4073698c
e45c405d1348b7b1
Output = 808ae5b87662eaaf0b39151dd85991b94c96ef214cb14a68bf5c1439548
82d330da8953a80eea20788e552bc8bbbfff3100e89f9d6e341197b122c46a208733
b
A.5.3.2. Test Vector 2, Batch Size 1 
Input = 5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Info = 7465737420696e666f
Blind = 00d1dccf7a51bafaf75d4a866d53d8cafe4d504650f53df8f16f68616333
88936ea23338fa65ec36e0290022b48eb562889d89dbfa691d1cde91517fa222ed7a
d364
BlindedElement = 030112ea89cf9cf589496189eafc5f9eb13c9f9e170d6ecde7c
5b940541cb1a9c5cfeec908b67efe16b81ca00d0ce216e34b3d5f46a658d3fd8573d
671bdb6515ed508
EvaluationElement = 0200ebc49df1e6fa61f412e6c391e6f074400ecdd2f56c4a
8c03fe0f91d9b551f40d4b5258fd891952e8c9b28003bcfa365122e54a5714c8949d
5d202767b31b4bf1f6
Proof = 0082162c71a7765005cae202d4bd14b84dae63c29067e886b82506992bd9
94a1c3aac0c1c5309222fe1af8287b6443ed6df5c2e0b0991faddd3564c73c7597ae
cd9a003b1f1e3c65f28e58ab4e767cfb4adbcaf512441645f4c2aed8bf67d132d966
006d35fa71a34145414bf3572c1de1a46c266a344dd9e22e7fb1e90ffba1caf556d9
ProofRandomScalar = 015e80ae32363b32cb76ad4b95a5a34e46bb803d955f0e07
3a04aa5d92b3fb739f56f9db001266677f62c095021db018cd8cbb55941d4073698c
e45c405d1348b7b1
Output = 27032e24b1a52a82ab7f4646f3c5df0f070f499db98b9c5df33972bd5af
5762c3638afae7912a6c1acdb1ae2ab2fa670bd5486c645a0e55412e08d33a4a0d6e
3
A.5.3.3. Test Vector 3, Batch Size 2 
Input = 00,5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a
Info = 7465737420696e666f
Blind = 00d1dccf7a51bafaf75d4a866d53d8cafe4d504650f53df8f16f68616333
88936ea23338fa65ec36e0290022b48eb562889d89dbfa691d1cde91517fa222ed7a
d364,015e80ae32363b32cb76ad4b95a5a34e46bb803d955f0e073a04aa5d92b3fb7
39f56f9db001266677f62c095021db018cd8cbb55941d4073698ce45c405d1348b7b
1
BlindedElement = 020095cff9d7ecf65bdfee4ea92d6e748d60b02de34ad98094f
82e25d33a8bf50138ccc2cc633556f1a97d7ea9438cbb394df612f041c485a515849
d5ebb2238f2f0e2,0201a328cf9f3fdeb86b6db242dd4cbb436b3a488b70b72d2fbb
d1e5f50d7b0878b157d6f278c6a95c488f3ad52d6898a421658a82fe7ceb000b01ae
dea7967522d525
EvaluationElement = 0301408e9c5be3ffcc1c16e5ae8f8aa68446223b0804b119
62e856af5a6d1c65ebbb5db7278c21db4e8cc06d89a35b6804fb1738a295b691638a
f77aa1327253f26d01,020062ab51ac3aa829e0f5b7ae50688bcf5f63a18a83a6e0d
a538666b8d50c7ea2b4ef31f4ac669302318dbebe46660acdda695da30c22cee7ca2
1f6984a720504502e
Proof = 00731738844f739bca0cca9d1c8bea204bed4fd00285785738b985763741
de5cdfa275152d52b6a2fdf7792ef3779f39ba34581e56d62f78ecad5b7f8083f384
961501cd4b43713253c022692669cf076b1d382ecd8293c1de69ea569737f37a2477
2ab73517983c1e3db5818754ba1f008076267b8058b6481949ae346cdc17a8455fe2
ProofRandomScalar = 01ec21c7bb69b0734cb48dfd68433dd93b0fa097e722ed24
27de86966910acba9f5c350e8040f828bf6ceca27405420cdf3d63cb3aef005f40ba
51943c8026877963
Output = 808ae5b87662eaaf0b39151dd85991b94c96ef214cb14a68bf5c1439548
82d330da8953a80eea20788e552bc8bbbfff3100e89f9d6e341197b122c46a208733
b,27032e24b1a52a82ab7f4646f3c5df0f070f499db98b9c5df33972bd5af5762c36
38afae7912a6c1acdb1ae2ab2fa670bd5486c645a0e55412e08d33a4a0d6e3

Authors' Addresses

Alex Davidson
Brave Software
Armando Faz-Hernandez
Cloudflare, Inc.
101 Townsend St
San Francisco,
United States of America
Nick Sullivan
Cloudflare, Inc.
101 Townsend St
San Francisco,
United States of America
Christopher A. Wood
Cloudflare, Inc.
101 Townsend St
San Francisco,
United States of America