TLD Zone Pipeline: Requirements And Design Principles

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶

This Internet-Draft will expire on 1 January 2024.¶

Copyright Notice

Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved.¶

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶

Table of Contents

1. Introduction

Today most TLD registries publish DNSSEC signed zones. This typically leads to a zone production "pipeline" that consists of several steps, including generation of the unsigned zone, signing of the zone and various types of verifications that the zone is correct before publication on the Internet.¶

In some cases, including the .SE Registry, the zone pipeline was not the result of a clear requirements process, nor was it the result of a concious design and implementation. Rather, it was the result of combining various tools in a mostly ad-hoc way that achieved the goal of moving the zone via signing and verifications towards publication.¶

When a critical part of the operation of a TLD registry is the result of an ad-hoc process there are likely to be hidden risks. That was the case for the .SE registry, which had a serious incident in February 2022. Because of that incident, .SE decided to re-evaluate the requirements on the zone pipeline and then create a more robust implementation from scratch.¶

This document aims to describe the requirements for zone production (also known as "zone pipeline") that the .SE Registry choose in preparation for the implementation of the new zone pipeline. It is developed for the needs of the .SE and .NU TLD Registries, but the conclusions are intended to be generally applicable.¶

2. Purpose

A TLD Registry has a total responsibility towards society and the Internet community to ensure, at any given time, public access to correct versions of the DNS zones under their management. In order to meet this commitment, three components are essentially required:¶

• Generation of unsigned zones from the Registry System.¶
• Quality control and signing of the zones.¶
• Publication of resulting signed zones.¶

The first step is handled by the Registry System. The third step is handled by a combination of external providers of authoritative DNS service and in-house DNS service. Both of these steps are out-of-scope for this document¶

The sole purpose of this document is to provide a correct set of requirements for the second step, between zone generation in the Registry System and zone publication on the public Internet.¶

3. Terminology

Well lit

Software or other system that is successfully used in production, similar to our needs, in a large number of other places around the world.¶

Upstream

Further up in the zone pipeline, i.e. in the direction of the Registry System.¶

Downstream

Further down the zone pipeline, i.e. towards the public Internet.¶

4. Basic Design Principles

A number of fundamental principles are defined for the design of the system. The intention of these principles is to minimize the risk that the zone data (as generated by the Registry System) can somehow change at any stage through the zone pipeline.¶

• Critical path for zone data must be via proven and well-reviewed standard software. This critical path is called the "zone pipeline".¶

  Rationale: Using well-established software used by others in the industry reduces development needs for the Registry. By not being critically dependent on self-developed software, the dependence on individuals is reduced.¶

• Standardized protocols shall be used as far as possible.¶

  Rationale: Individual components must be replaceable as easily as possible.¶

• Consequences of inaccuracies in custom software must be limited as far as possible and must never affect published zone data.¶

  Rationale: Obvious opportunities for risk minimization of a critical system within the business.¶

• Verification, signing and publication of the zone must be able to take place independently and without dependence on infrastructure outside the operating facility.¶

  Rationale: The ability to always maintain and publish an updated zone is the most important responsibility of the Registry. To ensure the ability to always maintain this ability the zone production must be self-contained.¶

5. Interface to the Registry

Interface to the Registry System must be done according to standardized protocols. This requirement has the following consequences:¶

• Zone data must be retrieved from the Registry System using AXFR and IXFR [RFC5936].¶
• The request for publication of new zone data must be notified with DNS NOTIFY [RFC1995].¶
• Zone data published by the Registry System must contain a checksum in the form of ZONEMD [RFC8976].¶

6. Local Updates

During normal operation, no changes to the zone data retrieved from the Registry may take place. However, there may be situations where the Registry is not reachable (nor is it expected to be reachable within a reasonable time) and where local updates of zone data must be able to be carried out. This can for example,. be redirection of socially important infrastructure.¶

In a crisis situation (emergency operation), zone updates must be able to take place locally. Updates that take place in this way are introduced into regular systems as soon as possible. Return to normal operation may only take place after all changes made during emergency operation have been introduced into the regular system.¶

Local updates must be applied using a strict and traceable method. It must be clear at all times whether local updates have been applied, what these are and who requested them.¶

In cases where local updates have taken place, ZONEMD must be updated.¶

N.B. Local updates are an extraordinary measure and must not be used except in emergency situations. Procedures for who may request these are decided by the Internet foundation's crisis management.¶

7. Ingress Verification

Before signing, a number of checks must be performed on the zone contents. The reason why checking must take place before signing is to ensure that the zone being signed is always correct and can thus continue to be re-signed in the event of problems upstream. The exact checks to be carried out are set out in a separate specification and are subject to local policy.¶

8. Signing

The task of the signing step is to keep an approved and received zone signed for an arbitrary length of time until a new zone is received from upstream (i.e. from Registry via Ingress Verification).¶

9. Egress Verification

After signing, several checks must be performed on the zone contents. Apart from the obvious validation of generated DNSSEC signatures it is also important to ensure that the signing step only added DNSSEC- information without in any way modifying the unsigned data.¶

10. Distribution

The following requirements apply to distribution of the signed zone:¶

• The signed zone must be retrieved from signing and egress verification to the distribution points with AXFR (not IXFR).¶
• The signed zone shall be distributed to the designated authoritative name server services using AXFR/IXFR.¶
• To reduce convergence time towards the public Internet, the signed zone must be distributed with IXFR as far as possible.¶
• At least two complete zone publishing chains must be operational and always active.¶
• Choice of zone publishing chain is an active configuration choice in each distribution point and must always be the same for all distribution points.¶
• The signed zone from the selected zone publishing chain must be retrieved by all distribution points in all operating facilities.¶

11. Resulting Design Consequences

• The requirement on being able to prove that no unsigned data has been modified during signing is most efficiently fullfilled by computing the ZONEMD checksum on the unsigned data after signing (i.e. the signed zone modulo the DNSSEC related records DNSKEY, RRSIG. NSEC, NSEC3, NSEC3PARAM, apex CDS and CDNSKEY) and comparing that to the ZONEMD checksum for the corresponding unsigned zone.¶
• The ZONEMD checksums need to be stored outside the zone pipeline, indexed by the unsigned zone that each checksum corresponds to.¶
• The signed zone may (and will) change the SOA Serial independently of the unsigned zone. For this reason the ZONEMD checksums can not be stored using the SOA Serial as the index. Therefore a separate, unique, identifier is attached to each new version of the zone as a TXT record. A UUID is used as the identifier.¶
• Each unsigned zone MUST have a ZONEMD and a UUID index to store it under. Therefore changes to the unsigned zone via the local update facility must update the UUID in addition to any other change that is executed.¶
• The Registry runs multiple, parallel zone pipelines for the same zone with the requirement to be able to switch which pipeline is "active" at any time. As the local update facility is responsible for updating the UUID if a local change is needed, the same UUID will identify the exact same zone in all pipelines.¶
• The requirement that the zone pipeline only consists of proven and widely used software forces all local and custom software (including various tests and verification modules) to be located outside the zone pipeline. This cause a need for a component inside the zone pipeline with the ability to call an external "verifier" for verifications. At present only one such component is known (the authoritative nameserver NSD with its "verify:" attribute), but we hope that there will be more alternatives in the future.¶

12. Security Considerations

The correct generation and DNSSEC signing of a TLD zone is a matter of significant importance. As such requirements and methods for verification of correctness is an important matter that has previously not been much publically discussed.¶

As a requirements specification this document aims to make this topic more public and visible with the intent of improving the correctness of the requirements via public review.¶

13. IANA Considerations

None¶

14. Acknowledgements

Appendix A. Change History (to be removed before publication)

• draft-johani-tld-zone-pipeline-00¶

• Initial public draft.¶

• draft-johani-tld-zone-pipeline-01¶

• Security and IANA Considerations sections added. Minor typos fixed.¶

Authors' Addresses